335i

  1. purpol e9deh

    Technical Persistent Cylinder 6 Misfire!

    07 E90 335i 6AT posted this to e90post but not much happening over there so I’ll try here for as much info as I can get ;) I originally chased a misfire all the way around the car (bad HPFP and coil on cyl 3), I replaced my entire fuel system besides injectors 1-4 and fuel pump control module...
  2. samuria

    MSD80/81 CANbus Boost

    Has anyone successfully decoded boost pressure from OBD canbus? I have tried reverse engineering a few apps that log boost pressure, but the later versions of the apps have some level of obfuscation. I have not tried tapping into PT-CAN yet, just waiting for an Arduino shield to arrive before...
  3. M

    E9X Boost issue after new intercooler?

    Hi all, For reference: MHD st2+ E30 Replaced my radiator this evening and decided to swap in the 5” VRSF intercooler I’ve had sitting on the shelf for a while Before I installed the new intercooler I would hit 22.8psi sometimes 23 With the new intercooler in I’m only hitting about 15psi even...
  4. odesh

    Starting a single turbo 335i build. Advices and ideas are welcome.

    Hi, And hello to everyone on Spoolstreet. My beloved 335i n54 has come to the point of 100k miles and it's time to move on from twins. I'm planning to move to Doc Races bottom mount single turbo kit with 6266 gen 1. I try split my typing into segments, so I can explain everything I will do as...
  5. suspenceful

    Video My $3,500 335i is WAY Faster than I Expected

    I recently gambled on a 335i from across the country for only $3,500. Once it showed up, I realized it had 19T turbos, FBO, inlets, outlets, etc :fearscream: Enjoy my buddy and I's first reaction once we realized how fast it was...
  6. A

    N54 PCV/OCC (Oil Catch Can) set up for M18 VC (valve cover) on my 335IS

    So once I realized the dilemma of needing oil catch cans after installing the valve cover. Due to there being no cyclonic separator, as well as not being able to reuse the OEM PCV or CCV (Crank case vent hose) as the 2 ports (high/boost and low/vacuum) on the M18 VC are both just -10AN. I then...
  7. G

    E9X N55 BOV sound and car is "shaking"

    Hello everybody, I have a car 335i E90 {N55 PWG}. My car had a lot of issues (But somehow, we started fixing all problems). The core issue was, that a car was going on boost very late and once it was boosted `target/actual` PSI was very far from each other (Target PSI = 18 / Actual PSI = 4...
  8. ClaytonT

    DIY Data Log for FBO N54 (Throttle Cutting/Shuddering)

    Hi guys Hope everyone staying safe. This is a data log showing the hesitation and or loss of power under WOT that I’ve been experiencing lately. It feels like it’s on the verge of going into limp mode but then recovers and the boost will then keep building right up and through the gear change...
  9. S

    N54 (E92) Spark Plugs/Coils bad every 6-7k miles

    Hello all, first forum post so I hope I do this right. Got my car in April this year(2010 BMW 335i e92), and it currently has 70k miles. Mods: VRSF Dual Cone Intake Upgraded Chargepipe VRSF 7.5" Intercooler BMS Oil Cooler Valve Maintenance: Valve Cover Gasket 65k miles Oil change when I got...
  10. namsu2430

    MHD v9.0 beta

    With V9.0 being pushed to the general public now it might be worth while having some feedback , especially with those who had issues (overboost etc ) on v8.1 (now removed from the app) Car info e.g FBO Map flashed (options ticked if relevent) Altitude Feedback inc what you are comparing...
  11. matreyia

    Time to Replace Turbos - 2009 e93

    This morning, I was minding my own business and driving along when a Mustang 5.0 came by and asked to do a little racing, so I obliged and left him behind. Unfortunately, I looked down and realized temps were not yet 160F operating range. Felt a little slowdown/hesitation while WOT and RPMs...
  12. matreyia

    Technical Front End Noise and Reason Why Found - Belt and Pulleys

    I added the Improved Racing 185 F thermostat to replace the stock N54 thermostat and some oil must have dripped on the belts and pulleys or something. After re-assembly, there was a clicky swoosh swoosh noise in the front end. Visual inspection showed nothing abnormal. But I ordered new idler...
  13. Snelson3003

    Ad: NRW N54 FULL CARBON Engine Cover Pre-Sale Launch

    Hey Guys, Its been a long time since I've been engaged on this forum as I am usually busy with the general social media outlets. To be frank, if you reached me on any social media outlet I am working to catch up as I've been busy with making the items etc. So bear with me :) However I was...
  14. spoolzone

    Buying/DIAGNOSING a 2008 335i | dealer - "it has a fuel injector problem"

    First time taking codes from the 08 335i I just picked up ‍♂ Was told it had bad fuel injectors. Barely could touch the throttle at first and didn't wanna idle smooth at all until it warmed up. Ended up changing bank 1 plugs, coils, and injectors..Definitely made a huge difference. Links below...
  15. spoolzone

    My N54 FBO garage build (built motor at 113k)

    I have been slacking getting around to posting on this forum, so let me give a quick synopsis of my N54 experience thus far. Almost a year and a half ago I finally found the e92 335i I had been relentlessly searching for. It was in Ga (I live in Fl), but that didn't matter to me. 6spd MT black...
  16. DirtKurt

    Long term 09 E92 build with DCT conversion

    What's up everyone, I'm currently collecting parts to convert my 2009 335i 6AT to DCT. I've been re searching for awhile and feel like I have a pretty good grasp on most of what's involved. Currently have on hand a 335is dct transmission out of a 2011 w/44k miles, the entire shifter assembly ...
  17. Fishayyy

    Custom Steering Rack and Pinion

    So I've been looking into a lot of different suspension upgrades lately and one of the things that caught my eye was the idea of doing a custom manual steering rack. Has anyone tried going this route or at least deleting the power steering? I know some people have gone the route of using an M3...
  18. N

    FS BRAND NEW PURE STAGE 2 N55 F SERIES

    Selling a brand new ps2. STILL IN THE BAG NEVER OPENED! YOU KEEP YOUR CORE! Includes: Pure Stage 2 Turbo Hi flow inlet stage 2 Installation Kit Will ship on buyers expense $2800 OBO
  19. G

    FS N54!

    ...
  20. matreyia

    Propulsive Dynamics and xHP question for ANYONE.

    So, it's been almost a year since I got the PD unit and installed xHP...over all the PD unit shifts smooth on the PD stock flash but does jerk/lurch and hesitate when using Stage 3 xHP. Clemens said it was due to power levels but mine was the first with any issue with PD and xHP. I been trying...