1. Login to disable the Ads!

2010 335i Spec Clutch Install DIY

Discussion in 'N54' started by Ztuck45, Jun 1, 2017.

  1. Ztuck45

    Ztuck45 Private

    Messages:
    28
    Ride:
    2010 335i
    Hey guys, if anyone is interested in doing a clutch install I made a DIY video on YouTube. I covered installing a spec stage 3+ clutch, mfactory single mass flywheel and a bms short throw shifter.
    [​IMG]

    I made the video as informative as possible so I can help out as many people as I can! I will also soon be uploading a video of my Docrace 6266 single turbo install that I am also doing myself.

    Here's the video:


    Let me know what you think and subscribe for more!

    Thanks!
     
    Last edited by a moderator: Jun 1, 2017
    • Like Like x 6
    • Winner Winner x 1
    • List
  2. 335i_lou

    335i_lou Specialist

    Messages:
    82
    Location:
    Raleigh, NC
    Ride:
    E90 335i, FBO, inlets, outlets
    Cool and very informative video man! Good job!
     
  3. don detta

    don detta Lurker

    Messages:
    23
    Location:
    Northern Virginia
    Ride:
    2009 E90 335i lci
  4. Pull96333

    Pull96333 New Member

    Messages:
    5
    Ride:
    Bmw 135i coupe
    Great video man, well done!
     
  5. doublespaces

    doublespaces Administrator

    Messages:
    5,825
    Location:
    AZ
    Ride:
    2009 E93 335i
    Gotta get some of those E Sockets :)
     
  6. lamumba

    lamumba New Member

    Messages:
    5
    Location:
    Woodridge IL
    Thanks a lot for doing it ! My OEM clutch is giving up :(
     
  7. terryd5150

    terryd5150 Specialist

    Messages:
    86
    Ride:
    2008 E92 335i 2009 E90 335i
    Good video.

    Looking forward to the single turbo install video.
     
  8. Ztuck45

    Ztuck45 Private

    Messages:
    28
    Ride:
    2010 335i
    New video is up!
     
    • Like Like x 1
    • Winner Winner x 1
    • List
  9. markyb0

    markyb0 Specialist

    Messages:
    77
    Location:
    San Diego, CA
    Ride:
    2009 335i ST
    I just received my motiv twin disc clutch and I'm trying to get everything I need to install it. What bolts need to be replaced? I know the flywheels bolts have to be replaced and the bellhousing bolts as well. But I read somewhere that there are only 5 bolts on the bellhousing that are aluminum and need replacing. Is that true?
     
  10. Ztuck45

    Ztuck45 Private

    Messages:
    28
    Ride:
    2010 335i
    I replace the larger bolts on my bell housing, you can get the part numbers from realoem.com.

    Id recommend replacing the flywheel and pressure plate bolts as well.
     
  11. TWilly

    TWilly Specialist

    Messages:
    80
    Ride:
    Tyler
    Would like feedback on the Motiv twin disk clutch! Make a review post!
     
  12. markyb0

    markyb0 Specialist

    Messages:
    77
    Location:
    San Diego, CA
    Ride:
    2009 335i ST
    The 5 aluminum bolts part number 23000417164. I just ordered them off ECS and ordered new flywheel bolts to. Thanks and the motiv clutch comes with pressure plate bolts so I'm good there. Did you also replace the rear main seal? I was thinking about replacing it since its right there but I would have to buy the $200 seal kit just to do it. I was thinking whenever I get to it and if it seems to be holding up I'll leave it but if its leaking I'll replace it

    Will do but probably wont be for another 2 months.. Gathering up parts for single turbo build
     
  13. Arhoads335i

    Arhoads335i Private

    Messages:
    39
    Ride:
    335i
    Awesome post man! Keep it up
     
  14. JSans

    JSans Lurker

    Messages:
    15
    Location:
    NY
    Nice, I might need to upgrade my stage 2+ because I'm maxxing it out now lol. Good stuff
     
Loading...