2010 335i Spec Clutch Install DIY

Ztuck45

Private
May 16, 2017
32
37
0
Ride
2010 335i
Hey guys, if anyone is interested in doing a clutch install I made a DIY video on YouTube. I covered installing a spec stage 3+ clutch, mfactory single mass flywheel and a bms short throw shifter.
burnrubber.gif


I made the video as informative as possible so I can help out as many people as I can! I will also soon be uploading a video of my Docrace 6266 single turbo install that I am also doing myself.

Here's the video:

Let me know what you think and subscribe for more!

Thanks!
 
Last edited by a moderator:

terryd5150

Corporal
Mar 4, 2017
103
39
0
Ride
2008 E92 335i 2009 E90 335i
Good video.

Looking forward to the single turbo install video.
 

markyb0

Corporal
Jun 17, 2017
106
20
0
Hampton, VA
Ride
2009 335i ST
I just received my motiv twin disc clutch and I'm trying to get everything I need to install it. What bolts need to be replaced? I know the flywheels bolts have to be replaced and the bellhousing bolts as well. But I read somewhere that there are only 5 bolts on the bellhousing that are aluminum and need replacing. Is that true?
 

Ztuck45

Private
May 16, 2017
32
37
0
Ride
2010 335i
I replace the larger bolts on my bell housing, you can get the part numbers from realoem.com.

Id recommend replacing the flywheel and pressure plate bolts as well.
 

TWilly

Specialist
Jul 7, 2017
85
18
0
Ride
Tyler
Would like feedback on the Motiv twin disk clutch! Make a review post!
 

markyb0

Corporal
Jun 17, 2017
106
20
0
Hampton, VA
Ride
2009 335i ST
I replace the larger bolts on my bell housing, you can get the part numbers from realoem.com.

Id recommend replacing the flywheel and pressure plate bolts as well.

The 5 aluminum bolts part number 23000417164. I just ordered them off ECS and ordered new flywheel bolts to. Thanks and the motiv clutch comes with pressure plate bolts so I'm good there. Did you also replace the rear main seal? I was thinking about replacing it since its right there but I would have to buy the $200 seal kit just to do it. I was thinking whenever I get to it and if it seems to be holding up I'll leave it but if its leaking I'll replace it

Would like feedback on the Motiv twin disk clutch! Make a review post!

Will do but probably wont be for another 2 months.. Gathering up parts for single turbo build
 

JSans

Lurker
Nov 13, 2016
18
4
0
NY
Nice, I might need to upgrade my stage 2+ because I'm maxxing it out now lol. Good stuff