AD Engineering Ford 8.8 Kit with 1000 hp DSS axles

Brule

Sergeant
Feb 20, 2017
371
440
0
Ride
335i 2007 6spd manual

Can I give you a call?
Not sure what Time it is there though
 

AD-ENG

Corporal
Oct 22, 2016
122
140
0
39
Can I give you a call?
Not sure what Time it is there though

It's almost midnight here and I'm going to bed.

You can call the shop 7-9am Australian and we'll be in (we're about 17hrs behind you.

1 (509)330-5557
 

gmagnus7

Corporal
Dec 3, 2018
174
73
0
Ride
135i N54
How's the clearance for the exhaust with this kit? Just wondering how much room there is for a dual exhaust compared to the stock pumpkins; would have to hang a bit lower or something?
 

Brule

Sergeant
Feb 20, 2017
371
440
0
Ride
335i 2007 6spd manual
How's the clearance for the exhaust with this kit? Just wondering how much room there is for a dual exhaust compared to the stock pumpkins; would have to hang a bit lower or something?


The left side oem exhaust hits the diff. It has to be cut to fit. You can lower it but right side will be hard up and left side 40mm down.
 

gmagnus7

Corporal
Dec 3, 2018
174
73
0
Ride
135i N54
The left side oem exhaust hits the diff. It has to be cut to fit. You can lower it but right side will be hard up and left side 40mm down.
Sorry I'm just trying to picture it in my head... The left side needs to be dropped a bit? What about the right side? For a custom dual 3", you think there would be clearance?
 

Brule

Sergeant
Feb 20, 2017
371
440
0
Ride
335i 2007 6spd manual
Sorry I'm just trying to picture it in my head... The left side needs to be dropped a bit? What about the right side? For a custom dual 3", you think there would be clearance?

Right side oem exhaust fits. Leftside needs to be cut to clear the diff. A custom 3 inch will fit but ground clearance will be affected as the drivrshaft is larger diameters.

Lowest part o f my custom exhaust his at the hanger behind downpipes and I just have 2.5 inch pipes.
 

gmagnus7

Corporal
Dec 3, 2018
174
73
0
Ride
135i N54
Right side oem exhaust fits. Leftside needs to be cut to clear the diff. A custom 3 inch will fit but ground clearance will be affected as the drivrshaft is larger diameters.

Lowest part o f my custom exhaust his at the hanger behind downpipes and I just have 2.5 inch pipes.

Prefect thanks. I'll either do a custom dual 3" or maybe merge to a 4" at that point. We'll see what the shop says.