BKC Motorsport Intake Manifold Group Buy Feeler

[doublespaces]

I got the N54 stock location manifold only.

When does it arrive

 

[Tony@VargasTurboTech]

Yes and I'm going to make sure the injectors are adequate since these manifolds accept a EV1 Siemens 220CC injector and the harness/controllers you can buy are an EV14 550CC with a conical injector.

So there is a somewhat long road of testing ahead but I got shipment notification today.

You can get those EV1 injectors in any CC you wish. They are much more common than the EV6's we currently use on these cars.

 

[Snelson3003]

I found alot of EV1's for cheap which is a bonus.

All I need would be an EV6 -> EV1 adapter so once the manifold arrives I'll start parting together.

It shipped via ground Friday so it'll be here DEC 1st.

 

[Snelson3003]

Alright guys it came in last night! Hoping to get some decent pictures up after work!

 

[doublespaces]

Alright guys it came in last night! Hoping to get some decent pictures up after work!

Start a new thread

 

[Speedman3]

View attachment 594

What srut bar is that? Also, is that a dual OCC?

 

[A4RingedONE8T]

What srut bar is that? Also, is that a dual OCC?

It's something custom we did for Eric, it's the Dinan 335 bars, and the Dinan M3 strut, brackets modified/refabbed to have mounting for both. Won't see that again anywhere unless you were to do the same, and $2k later. That's my intake manifold as well, prebillet variant. I built several of them in this configuration.

-Shawn-

 

[TJ Jrackers]

If they could make this with bungs for direct port meth it would be a very interesting proposition for me

 

[ATL-IS-N54]

3403 looks interesting but those are some LONG ass runners. They also look to be narrower than the oem runners. Anyone else see that?

EDIT: After some reading, I'm convinced the 3403 is a very poor design for people looking to make more power. The runners are far too skinny and long. You'd see an increase in low-rpm power but a drop-off in power up top. I'd just go with the OEM-looking one.

For power, we need something like the 3405. Short fat runners with ~4.5L plenum volume.

And a huge heat sink at that

 

[J.Wick]

And a huge heat sink at that

look at these runner lengths? Have you seen the runners on a factory s52?

http://fsrmotorsports.com/index.php...d=87&vmcchk=1&option=com_virtuemart&Itemid=87

https://docrace.wordpress.com/2012/11/20/e46-m3-intake-manifold/

 

[langsbr]

Hate to bump an old thread but I never see any of the forward facing intakes being posted, and never any for sale. Anyone ever get one, and are you happy with it, and anyone get one they never installed and want to sell?