Cheezy

Lieutenant
Nov 7, 2016
611
225
0
Toledo Ohio
I'm acquiring a front diff from another 2011 335xi AT e90. Any use for sending it in, or should I just see if it's bolted/welded? @MFactory

I think there was some confusion over whether the n55s were different (I still doubt they are) but this should put that to bed.
I think the only thing they may need sent in is a 3.08 bolted and/or welded. @Twisted Tuning already sent in a welded 3.46 and I'm going to send in a bolted 3.46.

Edit: I just saw mfactory's reply. Does no harm.
 

Maniac0908

Corporal
Mar 22, 2018
109
6
0
Ride
07 335xi
Actually it can. Setting up a machine to produce a batch of something is one of the most time consuming parts of doing the manufacturing.

Because of this, each different ratio we ask for costs a significant amount, and the only way to mitigate this cost is to buy in volume (let the machine make a bunch once its setup) so asking for additional ratios is likely a no go I'd bet.

o ok. I didn’t know. Well they are alreadygoing to have to make 2 different ones for at and mt right?
 

Jusinn4

New Member
Feb 15, 2020
1
0
0
1 Twisted Tuning
2 Travis Harre
3 Ivan Sanchez
4 DrWeedLive
5 Jesse Cameron
6 Alex Peterson
7 Tim Bies
8 Duane Pugh
9 Brennan Wallman
10 Michael Rooney
11 Erik Chik
12 Maniac0908
13 Bsimmi15
14 Btxbimmer
15 The Banshee
16 Mistajay
17 Taron
18 FOXYZ
19 shushikiary
20 Brian Antic
21 scrllock
22 Rstech
23 cheezy
24 shooter26
24 Justin Davis
 

kylerwinters

Lurker
May 25, 2019
14
16
0
Ride
335xi
Yes, of course. Our address is:

MFactory R&D
FAO: X-Drive LSD / Your Name
581 W. Covina Blvd
San Dimas, CA 91773
USA
TEL: 909-592-5933

I could send in a welded diff if you would like. It's sitting on my shelf.

If we can get a update on this, I would be willing to sign up on the list. My hesitation is that I have been watching this thread for two years with little to no progress. Is this list for buyers even current?
 

M18.racing

Specialist
Mar 20, 2017
59
84
0
Ride
E92 335XI & E89 35i z4
1 Twisted Tuning
2 Travis Harre
3 Ivan Sanchez
4 DrWeedLive
5 Jesse Cameron
6 Alex Peterson
7 Tim Bies
8 Duane Pugh
9 Brennan Wallman
10 Michael Rooney
11 Erik Chik
12 Maniac0908
13 Bsimmi15
14 Btxbimmer
15 The Banshee
16 Mistajay
17 Taron
18 FOXYZ
19 shushikiary
20 Brian Antic
21 scrllock
22 Rstech
23 cheezy
24 shooter26
25 geotko
26 M18Performance 3.46
 
  • Like
Reactions: RSTECH

kylerwinters

Lurker
May 25, 2019
14
16
0
Ride
335xi
1 Twisted Tuning
2 Travis Harre
3 Ivan Sanchez
4 DrWeedLive
5 Jesse Cameron
6 Alex Peterson
7 Tim Bies
8 Duane Pugh
9 Brennan Wallman
10 Michael Rooney
11 Erik Chik
12 Maniac0908
13 Bsimmi15
14 Btxbimmer
15 The Banshee
16 Mistajay
17 Taron
18 FOXYZ
19 shushikiary
20 Brian Antic
21 scrllock
22 Rstech
23 cheezy
24 shooter26
25 geotko
26 M18Performance 3.46
27 kylerwinters
 
  • Like
Reactions: RSTECH

nanoo

New Member
Feb 24, 2017
8
3
0
Ride
e90 335xi
1 Twisted Tuning
2 Travis Harre
3 Ivan Sanchez
4 DrWeedLive
5 Jesse Cameron
6 Alex Peterson
7 Tim Bies
8 Duane Pugh
9 Brennan Wallman
10 Michael Rooney
11 Erik Chik
12 Maniac0908
13 Bsimmi15
14 Btxbimmer
15 The Banshee
16 Mistajay
17 Taron
18 FOXYZ
19 shushikiary
20 Brian Antic
21 scrllock
22 Rstech
23 cheezy
24 shooter26
25 geotko
26 M18Performance 3.46
27 kylerwinters
28 Nanoo
 
  • Like
Reactions: RSTECH

Theloudone

New Member
May 17, 2020
3
1
0
Im in for one also.

2011 335XI MT build date 02/11

1 Twisted Tuning
2 Travis Harre
3 Ivan Sanchez
4 DrWeedLive
5 Jesse Cameron
6 Alex Peterson
7 Tim Bies
8 Duane Pugh
9 Brennan Wallman
10 Michael Rooney
11 Erik Chik
12 Maniac0908
13 Bsimmi15
14 Btxbimmer
15 The Banshee
16 Mistajay
17 Taron
18 FOXYZ
19 shushikiary
20 Brian Antic
21 scrllock
22 Rstech
23 cheezy
24 shooter26
25 geotko
26 M18Performance 3.46
27 kylerwinters
28 Nanoo
29 Theloudone
 
Last edited:
  • Like
Reactions: RSTECH

RSTECH

Lurker
Nov 28, 2016
18
4
0
New York
@MFactory we have 25 confirmed buyers, I have a bolted sample I can send in for r&d. Can we get this moving?
Did you ever get a chance to send the diff in? So far we have 29 people, so definitely enough interest 🕺. Hope this happens this year as a few of us now have built motors and want to test these bad boys 😂🤣.
 

RSTECH

Lurker
Nov 28, 2016
18
4
0
New York
I think at this point if they are both the same size and etc. And the cases are the same, just make one type and people will just buy the full diff and remove their old one bolted or welded.
Yup, agree bolted or not just make the full diff with two gear ratio options 3.08 and 3.46, swap diffs and move on....