BQ Tuning N54 Intake Conversion

[typedRew]

this is the dream oem+ setup, i really want this to work well enough to make sense

thanks for continuing the project

 

[JimboFresh206]

if anyone needs a 740 air-box, I have one for cheap. went single before trying this out : ]

 

[NoQuarter]

I ended up using both wire carriers. The 740 carrier Includes a mounting point for the air box but has a spot for just 1 large wire harness and a small one.

The stock carrier also hides what is a pretty ugly area otherwise

 

[aus335iguy]

I ended up using both wire carriers. The 740 carrier Includes a mounting point for the air box but has a spot for just 1 large wire harness and a small one.

The stock carrier also hides what is a pretty ugly area otherwise

View attachment 37623

That looks neat

 

[fmorelli]

Give this a look see when you get a chance.

Creating Variable Radius Fillets | Fusion 360 | Autodesk Knowledge Network

Use the Fillet command to add rounds and fills to edges using a variable radius.A variable-radius fillet has a radius that varies along its length. You set a radius for the start point and endpoint. You can also add intermediate points along the length, each of which can have a different...

knowledge.autodesk.com

Nice. When is the homework assignment due? And is there a quiz?!

Filippo

 

[The Convert]

Nice. When is the homework assignment due? And is there a quiz?!

Filippo

Given everywhere is closed, and you’re both stuck at home...homework is due by COB Friday, and I’m not saying there will be a quiz, so be prepared for a pop quiz.