Custom Plenum Creations billet Intake Manifold for B58

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Not a whole lot of information here but the manifold was on display at SEMA in the Greddy "Drift Concept" Supra and was made by Custom Plenum Creations. I've reached out to them about the fitment of the manifold for other B58 vehicles and any updates will be posted here.

Its really amazing to see the level of support the B58 is getting now due to the Supra, it seems there is no loser with a bigger audience. I'll need to check on the manifold flange for the older B58 and compare it to the new one before any guesses could be made regarding the fitment of this manifold on the existing B58 vehicles. It would seem safe to believe the new G29 Z4 and G20 3 series would fit without much or any issues.

71714577_2509229016027428_6392249257323570467_n.jpg72613062_151874766066341_8679388731931889520_n.jpg72782397_497747614287838_6311294759679157293_n.jpg74530462_424555115111901_2658642232964743812_n.jpg75595202_143143943637853_7849625505660234742_n.jpg
 
  • Like
Reactions: Rileyg and Torgus

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
I've been told any product inquiries would need to go through Greddy. Perhaps we will see it pop up for sale at some point.
Screenshot_20191105-131110_Facebook.jpg
 

Nugs

Specialist
Nov 5, 2016
60
49
0
Perth
Doesn't the air use the same radiator as the charge cooling system on B58 cars?
So will going to this type of intake manifold with a FMIC mean losing air con?
 

newbimmerguy

New Member
Nov 21, 2019
3
0
0
Ride
Rollin Kanardly
Doesn't the air use the same radiator as the charge cooling system on B58 cars?
So will going to this type of intake manifold with a FMIC mean losing air con?

-The stock intake with the integrated air-to-water intercooler does, but I'm betting that this intake gets rid of the integrated air-to-water intercooler and requires converting to an air-to-air intercooler. (See Papadakis racing's B58 build)

That pattern on the outside sure looks like this thing has spent some time in a CNC mill which means it's NOT going to be cheap, unless they build a cast version based upon the one in the picture... It does look like it cost a million bucks, at least! ;-)


Adam
 

Nugs

Specialist
Nov 5, 2016
60
49
0
Perth
I understand you have to have to go to an air to air intercooler.
I was just questioning if that means you lose air con. Which greatly diminish the appeal for street cars.