E8X E46M3LOL Build thread... chasing 10s

  • Login or Register, members don't see Ads!
  • Tip: You can toggle the Dark Theme at the bottom of the page

E46m3lol

Lurker
Jun 9, 2017
10
Hey guys long time lurker... been around for quite a few years as a vendor (Eurotuninggroup).
Anyway, here is my low budget build! Car is my daily driver, Friday night drag car and some weeknights you'll catch me at local Tomball Tx car meets.

Bought my 2010 135i from an enthusiast out in Arizona right before I moved to Houston back in April 2019. Car was lightly modded with some BMS DCI and a VRSF chargepipe, VRSF downpipes and MHD ots map.

Fast forward to July or so and she has gone on a diet along with the addition of a nice selection of aftermarket parts and the help of custom tuning by @V8bait

Will update the thread with more pics tomorrow of the whole build process I've done so far!

IMG_8776.jpg

IMG_1699.jpg
 

E46m3lol

Lurker
Jun 9, 2017
10
What intake manifold is that?
It’s a Black Market Parts product. It will be released publicly on the site shortly. They’ve made the manifold with different specs compared to what can be sourced currently from vendors online.
 

Torgus

Captain
Nov 6, 2016
1,457
Boston
It’s a Black Market Parts product. It will be released publicly on the site shortly. They’ve made the manifold with different specs compared to what can be sourced currently from vendors online.
With lower charge pipe?

Any more details? I assume no velocity stacks.
 

E46m3lol

Lurker
Jun 9, 2017
10
She was all stock looking on the outside when I first got her...
IMG_1349.jpg

Had a few bolt ons already before i tore it apart for the first time

IMG_1356.jpg

IMG_1368.jpg


The fun begins!

Installed a new 7.5" race VRSF intercooler
IMG_1397.jpg

IMG_1376.JPG
IMG_1372.jpg
IMG_1379.JPG
IMG_1383.JPG
 
  • 1Like
Reactions: doublespaces

E46m3lol

Lurker
Jun 9, 2017
10
Installed 2" Precision Raceworks inlets on the stock turbos with the help of some Precision Raceworks turbo flange adapaters
IMG_1411 (3).jpg
IMG_1415 (1).jpg


Next up I did the VRSF outlets
IMG_1409.jpg

IMG_1382.JPG
IMG_1401.jpg
IMG_1406.jpg



IMG_1427.jpg
IMG_1422.jpg
 
  • 1Like
Reactions: doublespaces

E46m3lol

Lurker
Jun 9, 2017
10
Next up came time to take care of some constant misfires that were caused by worn out stock coils. I went with the stock location Precision Raceworks ignition coils!
IMG_1522.jpg
IMG_1528.jpg

IMG_1525.jpg
 

E46m3lol

Lurker
Jun 9, 2017
10
Moved onto the interior and added a set of Blue anodized paddles from the world famous Steven Nelson which I also paired up with a blue push start button from my boy Bryan Hermosillo.

IMG_7864.jpg

IMG_2246.jpg
IMG_2244.jpg
 
  • 1Like
Reactions: doublespaces

E46m3lol

Lurker
Jun 9, 2017
10
Picked up a set of 95A Rev Shift tranny and engine mounts. JESUS these make the whole car vibrate. At this point...It's been about 2 months since I installed them. I've gotten used to them by now. Noticed drivetrain felt way more responsive right after I did these mounts.
IMG_7588.jpg
IMG_0546.jpg
 

ap485

Specialist
Nov 27, 2017
58
Houston, TX
I feel your pain with the NVH, I’ve them on my car too. Have you increased the idle rpm yet. I set mine to 850 and it helps a lot with the NVH.​
 

E46m3lol

Lurker
Jun 9, 2017
10
I feel your pain with the NVH, I’ve them on my car too. Have you increased the idle rpm yet. I set mine to 850 and it helps a lot with the NVH.​
I haven't messed with the idle rpm, will definitely look into it though.

Thanks for the heads up.
 

doublespaces

Administrator
Oct 18, 2016
8,100
AZ
Nice work!

I have one 'solid' mount from the Ade kit. Idle us set at 800 and it's not bad.

You doing LSD?
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top