PID is adding 40-45% in some spots, which is a ton. Not sure how yours is setup, but would be somewhat surprised if that's on the stock logic. When load by gear logic first came out, I tried it and simply flashing it back with the table to 0 didn't turn it off for me, I had to do a full write.
I'd add a good chunk to adder at 293 g/s and ramp up slightly from there as a quick test, but you'll obviously have more direct control working in the base table.
I'd add a good chunk to adder at 293 g/s and ramp up slightly from there as a quick test, but you'll obviously have more direct control working in the base table.