/FF/ N54 Billet Intake Manifold

Discussion in 'N54' started by A4RingedONE8T, Feb 2, 2017.

Trader History (0)
  1. A4RingedONE8T

    A4RingedONE8T Specialist Vendor

    62
    Just wanted to share the final revisions on our intake manifold. First production manifold will be leaving to Tony in the next day or two for his manifold testing. Updated and tweaked a few more things, moved it up to our larger plenum as it seems everyone thinks this engine needs a larger volume. Pulled a little more weight out of the plenum and gave it it's finishing touches and vac connections. Fuel Rail finalized and perfectly fitting around stock rail. My first batch of manifolds are already sold but have more billet coming tomorrow morning to start another 10. Visit our website www.Fab-Factory.com for further info. Appreciate everyone's following thumbupright.gif

    -Shawn-

    1.jpg 2.jpg 3.jpg 4.jpg 5.jpg
     
  2. A4RingedONE8T

    A4RingedONE8T Specialist Vendor

    62
    11.jpg 12.jpg 13.jpg 14.jpg 15.jpg 16.jpg 17.jpg 18.jpg
     
    • Like Like x 3
    • Friendly Friendly x 2
    • List
  3. Joe

    Joe Specialist

    That is beautiful.
     
  4. Looks great! I do have a question though, where's BOV meant to go? Or is that up to us to get fabbed?

    "Requirements for installation, not included with manifold:
    1. Cold side charge pipe modification to meet new throttle body location. Use our /FF/ Throttle Body Adaptor for your fabrication needs. A 3" pipe can be welded direct, or use a 3" slip fit silicone and T-bolt connection. "
     
  5. That is gorgeous. Really nice piece there guys.
     
  6. Erichale77

    Erichale77 Corporal

    225
    Clearwater, FL
    07 E92 coupe
    You will need to lengthen throttle body wiring and fab up charge pipe. Mine looks like this... IMG952946.jpg
     
  7. Kervio

    Kervio Private

    31
    Gorgeous manifold! At first glance I had to make sure it was an n54 bay without the ugly plastic manifold....
     
  8. 08_335i

    08_335i Sergeant

    254
    2008 ST 335i
    What about fitment with a Drivers side coolant reservoir?
     
  9. Erichale77

    Erichale77 Corporal

    225
    Clearwater, FL
    07 E92 coupe
    See pic of my engine bay.
     
  10. A4RingedONE8T

    A4RingedONE8T Specialist Vendor

    62
    BOV and map sensor will fit in the cold side charge pipe still.

    Thanks Chris, look forward to your comments once it's in your hands!

    I've made a few N54's not so ugly in my time =D

    Fits perfectly fine!

    Here's a picture of one of my sheet plenum manifolds (same TB location as the billet version) showing the drivers side mounted coolant tank, as well as a full charge pipe - IC to TB

    Eric bay.jpg IM charge pipe.jpg
     
  11. 135Pats

    135Pats Private

    32
    MD
    Beautiful
     
  12. Jeffman

    Jeffman Sergeant

    298
    Really nice!
    Repped.
     

Share This Page