Fuel Pressure Regulator

  • Login or Register, members don't see Ads!
  • Tip: You can toggle the Dark Theme at the bottom of the page

veer90

Lieutenant
Nov 16, 2016
929
West Nyack, NY
Boost referenced or static? What do you guys prefer and why? For high boosted applications
I recently converted mine from static to boost referenced with a base pressure of 58 psi. On high boost this lets you have more fuel up top than static for sure.

Still fine tuning my port injection but the injector duty cycle went from 97% to 60 something % up top at 33 psi.

both my pumps are hard wired though ymmv if you keep the EKP.
 

PFS

Specialist
Premium Vendor
Nov 19, 2018
51
If you have DI only (shotgun setup) it doesn't really matter, but if you're running PI it's a good idea to be boost referenced, especially at higher boost levels like you're asking about.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top