JB4 what is duty bias?

[ysjeon1698]

Im running jb4 backend flash, and using map 6...

Do I need to set duty bias and afr bias to "0" ??

what would happen if I dont set them to zero?

I logged without setting them to 0.. but will relog after I set them to zero.

Can someone look at the log and tell me what's going on with my car?

 

[doublespaces]

Im running jb4 backend flash, and using map 6...

Do I need to set duty bias and afr bias to "0" ??

what would happen if I dont set them to zero?

I logged without setting them to 0.. but will relog after I set them to zero.

Can someone look at the log and tell me what's going on with my car?

You should upload those files to datazap

 

[ysjeon1698]

Data 1:
http://www.datazap.me/u/ysjeon1698/335is?log=1&data=1-4

Data 2:
http://www.datazap.me/u/ysjeon1698/335is?log=0&data=1-4

 

[Terry@BMS]

Duty bias is how you adjust the base dutycycle curve if needed. You have the incorrect settings in there causing under boost. Like I told you yesterday set them to 0 or 50 (both setting restores the baseline curve) then evaluate.

The rest of the default settings and FAQ are posted here: http://www.n54tech.com/forums/showthread.php?t=10605

 

[ysjeon1698]

Oh.... Underboost...
I knew my boost was weird and very inconsistent

I will set it to 0 and relog on Friday. Thanks Terry.!!!