Kisspoint adaption ends with Systemerror

S5W95

New Member
Jan 13, 2019
3
0
0
Ride
E92 335i, E92 M3 G-Power
Hello Guys, a half a year later and the car still standing around and burns money. I wrote some post in may about Kisspoint adaption problems, we could eliminate and find all errors (with the protocol in ISTA). The main problem was the engine speed (at idle), it was a way too high and reported: "something is out of range".

Just again the facts, I have a SSP upgrade clutch in my 335i dtc. Our reseller in Germany from SSP tested the clutch in a 135i and it worked. The adaption progress also works smooth but only around 20 seconds. It ends with the error "Adaption canceled".

More detailed Error was always in the protocol, but not today. The reason there: Cancelled because of a System error (translated from german). With the status code: 19. Only some developer could find something with this status code I think, there is no additional error in the memory (only the standard error: Kisspoint adaption canceled).

1578676651248.png


And here the useless error in the memory:

1578676672355.png