Lifestyler's 6466 135i
- Thread starter doublespaces
- Start date
1.5mm stainless Steel Sheet and Put on the backside ( VD side) this : https://www.turbozentrum.de/abgassy...atten/hitzeschutzmatte-extrem-60x55cm/a-5120/
Shelf adhesive heat "wrap"
Works great !
@Lifestyler that link goes to a product where it is supposed to be adhered to non-heat source components to protect from radiant heat sources like a turbo or manifold. It specifically states that the product is to reflect radiant heat and the adhesive will let go if it hits 230°C. If you adhered that product directly to the manifold or turbo the adhesive isn't going to live very long.
Designed for up to 950°C radiant heat. The adhesive on the back can withstand up to 230°C.
Designed for up to 950°C radiant heat. The adhesive on the back can withstand up to 230°C.
I ONLY do this "Tape" on the backside of my headshiled . Not on manifold or exhaust housing
We called it thermoisolierung .Check the Link >
http://www.isaak-schweisstechnik.com/Hochtemperatur_Isolierung.html
We called it thermoisolierung .Check the Link >
http://www.isaak-schweisstechnik.com/Hochtemperatur_Isolierung.html
Stunning work...would you mind sharing the cost for something like a turbo manifold or a turbine housing?
Better u not know what the Cost is of my manifold and exhaust housing...
Amazing attention to detail with this build! Makes me want to buy a welder and start learning. If you ever sell this thing let me know.
Solid Quality of harness . But the 3d Print Connectors are a lil Bit wabbly. So Take Care while Install.
N other Mod i Start today is Install my CAE shifter . Finish this next days .(polished before install)
Had IRP ShortShifter before and IT works flawless to. But i want to try something new
Cae shifter is finally installed and i have some Pics from the "thermoisolierung" from my manifold to. So U Guys can see hows IT done.
CAE
Ohhhh That makes sense. That alcantara trim looks nice, I'm torn between hard surfaces and cloth. I've always thought Piano black would look awesome. At least for photos, before the smudges.
Details, details, details. A few questions
Is that a 1m dash console?
Methanol tank placement pics?
Is that some sort of vented power steering cap?
Do you have an air duct in passenger side front bumper going to turbo filter?
Is that a 1m dash console?
Methanol tank placement pics?
Is that some sort of vented power steering cap?
Do you have an air duct in passenger side front bumper going to turbo filter?
Meth Tank 10l is in the trunk in the left Side .
Modded 135i Dash
OEM BMW steering Cap
Auch duct from bottom to turbo with 2" Hose And aicduct from Grills to turbo to.
Build complett 3" from fmic to TB
With vibrant vanjen clamp
Stainless Steel tig welded backpurged .
Enjoy
With vibrant vanjen clamp
Stainless Steel tig welded backpurged .
Enjoy
Similar threads
