Load req vs load actual

GreyNBlueE92

Corporal
Oct 3, 2018
148
OH
What tables need changing to get load actual closer to load request? I raised load target but don't understand why I'm only targeting 9 psi at 4.4k, I would like to target 16-17 psi through 5k on stock turbos. Any help is greatly appreciated!

 

GreyNBlueE92

Corporal
Oct 3, 2018
148
OH
I started from scratch and the result was much better. Here's where I'm at now.

 

Jeffman

Captain
Jan 7, 2017
1,386
Looks good. Pretty much what I did, started with a SPX bin years ago in the Cobb days, then converted to MHD. I even posted one of my bins on the forums.
 

GreyNBlueE92

Corporal
Oct 3, 2018
148
OH
What is the recommend minimum rail pressure? I try to shoot for 1500+ but recently I've seen low 1400s

One more thing. When I first flash does it take a few runs for PID to figure out where it wants to be? Meaning I shouldn't be basing my logs off of the first few?
 

Similar threads


Top