Mechatronics TCU close up pics

Feb 4, 2018
43
#1
Tried to take som good close up shots on my mechatronics TCU, buts its a little hard with all the wires in the way...
DSC_1208.JPG
DSC_1206.JPG
 

doublespaces

Administrator
Oct 18, 2016
6,758
AZ
#2
Ah yes, this is gold! Not often you get to see this close up. Hopefully there is more coming, highly valuable!
 
Feb 4, 2018
43
#3
Ill get some more, this is a little beat up as well :p It would have been easier if i thought of taking photos before i started adding cables haha.
 

aus335iguy

Lieutenant
Nov 18, 2017
780
#4
Try again in the correct thread shall I ?
P1016707.JPG
P1016718.JPG
P1016719.JPG
 

aus335iguy

Lieutenant
Nov 18, 2017
780
#6
A few phone shots of a disassembled mech unit. You can see the control/logic board, the various solenoids and of course the pistons/hydraulic actuators on the bottom. These Krautz weren’t missing out on wiener schnitzel and Weiss bier when they built this thing. It’s heavy and VERY well engineered.
 

Attachments

aus335iguy

Lieutenant
Nov 18, 2017
780
#7
It seems fairly straight forward logically there’s control logic board, solenoids and valves that drive pistons to move gears and clutches. Simple.
 
May 16, 2018
1
#8
hi there
i#m looking to do a dct swap on a m3 e92...like for like...stock car and soft...both
does used mechatronic from the donor car e92 m3 work on any other used e92 m3 ?
can i swap the gearboxes completely ?

is the egs module built in this mechatronic unit ?
can be taken off the mechatronic and installed on an other used mechatronic ?

cheers
 
Nov 18, 2017
780
#12
It would work intermittently but had coms issues. I’ll send you a link to the thread when I manage to find it
 

Similar threads

Top