Motiv Based RHD N54 & N55 Single Turbo Kit

martymil

Major General
Sep 6, 2017
3,331
1,906
0
Down Under
Ride
S65 1m
I've been helping develop this kit for the last three years and its ready for production.


Kit Includes:

  • Motiv N54 / N55 RHD manifold with custom hot side pipe
  • Custom Turbo manifold heat shield (optional ceramic coating)
  • Garrett GTX3076R Gen2, GTX3576R Gen2 or Garret GTX3584RS with modified compressor housing
  • 3 inch dump pipe to standard exhaust connection
  • 3 inch inlet with dry filter
  • Custom turbo to IC pipe
  • Tial MVR or Turbosmart Hypergate 45mm Wastegate.
  • Chromoly Engine Mount Relocation Kit with custom comfort mount (45A)
  • Turbo scavenge tank with VDO pump oil return
  • Oil check valve
  • PTFE lines and Speedflow dash fittings
  • Custom RHD block-offs
  • Custom RHD water coolant relocation
  • All silicon joiners and constant pressure Turbosmart clamps
  • Ceramic coating (optional)
  • Motiv Boostbox (optional)
  • Mac Solenoid (optional)
  • 800 to 1800hp monster IC kit (optional)
  • Custom VTA catch can system (optional)
  • Plazmaman FF manifold (optional)
  • Custom IC to TB up pipe (optional)
  • Turbosmart Big Bubba DV or Raceport BOV (optional)
This kit has been extensively tested for the last two years covering over 20,000 miles (32000km) through unforgiving, hot Australia summers and short but cold winters.

Add 20 to 25% to convert from Dyno Dynamics to Dyno Jet power figure so conservatively around 763whp

This is on a stock freak motor and transmission that has managed to survive the shear abuse and torture of our enviroment and testing.

We have seen higher numbers but the transmission was not happy at over 28psi.

Boost was limited even though the GTX 3584rs Turbo is 35psi+ capable

60681394_1338196709671099_7601136466516770816_o.jpg
 

Attachments

  • 20181002_095153[22980].jpg
    20181002_095153[22980].jpg
    316 KB · Views: 603
  • 60942552_1338201243003979_3494891730015092736_o.jpg
    60942552_1338201243003979_3494891730015092736_o.jpg
    314.2 KB · Views: 688
  • 61059368_1338197779670992_6870968567085400064_n.jpg
    61059368_1338197779670992_6870968567085400064_n.jpg
    263.6 KB · Views: 661
  • WP_20170104_15_27_21_Rich[22982].jpg
    WP_20170104_15_27_21_Rich[22982].jpg
    261.9 KB · Views: 639
  • 60724387_1338201693003934_2401196518750027776_n.jpg
    60724387_1338201693003934_2401196518750027776_n.jpg
    157 KB · Views: 605
Last edited:

martymil

Major General
Sep 6, 2017
3,331
1,906
0
Down Under
Ride
S65 1m
with the constant fluctuating exchange rate its hard to put a price on it.

but around 20 to 25k aud
 

Dezer1011

New Member
Aug 20, 2021
1
0
0
I've been helping develop this kit for the last three years and its ready for production.


Kit Includes:

  • Motiv N54 / N55 RHD manifold with custom hot side pipe
  • Custom Turbo manifold heat shield (optional ceramic coating)
  • Garrett GTX3076R Gen2, GTX3576R Gen2 or Garret GTX3584RS with modified compressor housing
  • 3 inch dump pipe to standard exhaust connection
  • 3 inch inlet with dry filter
  • Custom turbo to IC pipe
  • Tial MVR or Turbosmart Hypergate 45mm Wastegate.
  • Chromoly Engine Mount Relocation Kit with custom comfort mount (45A)
  • Turbo scavenge tank with VDO pump oil return
  • Oil check valve
  • PTFE lines and Speedflow dash fittings
  • Custom RHD block-offs
  • Custom RHD water coolant relocation
  • All silicon joiners and constant pressure Turbosmart clamps
  • Ceramic coating (optional)
  • Motiv Boostbox (optional)
  • Mac Solenoid (optional)
  • 800 to 1800hp monster IC kit (optional)
  • Custom VTA catch can system (optional)
  • Plazmaman FF manifold (optional)
  • Custom IC to TB up pipe (optional)
  • Turbosmart Big Bubba DV or Raceport BOV (optional)
This kit has been extensively tested for the last two years covering over 20,000 miles (32000km) through unforgiving, hot Australia summers and short but cold winters.

Add 20 to 25% to convert from Dyno Dynamics to Dyno Jet power figure so conservatively around 763whp

This is on a stock freak motor and transmission that has managed to survive the shear abuse and torture of our enviroment and testing.

We have seen higher numbers but the transmission was not happy at over 28psi.

Boost was limited even though the GTX 3584rs Turbo is 35psi+ capable

View attachment 27414
Hey mate im in melbourne how much does the full package cost and are u still making the kit
 

martymil

Major General
Sep 6, 2017
3,331
1,906
0
Down Under
Ride
S65 1m
I dont make the kit but can put you in touch with the fabricator and its around 30k aud
 
Last edited:

135i2

Specialist
Jul 23, 2017
98
97
0
Ride
135i
Not making the motiv based kit anymore.
Latest version is a full free flowing tubular.
 
Last edited: