Motiv Flex Fuel Installation Guide
- Thread starter doublespaces
- Start date
Most euro cars will not have the wire there. You are good.
Uninstall your current version then check the play store again
Yup. Did that twice. No luck. Says v1.66, but says I'm in beta program. Rebooted phone on second install for giggles. No luck.
Filippo
Just double checked, you never msg me your gmail account that you use MHD with. Need to add you to the group before the 1.70 version will be available for you.
While doing this install, I added in some extra power ports. Re-pinned the orange power into a splitter then attached 3 plugs.
Interesting. This is just in case you need more 12v under the hood? Is that term 15 or 30?
Exactly. Seems like something always popping up that I want to power. I believe this is called Term 15 (powers on with ignition only, engine not started)
I think you misinterpreted the question
I know the software can do it
The problem is how do we wire in a fuel-it ethanol sensor into the dme so we can use the software to read E.
I don't need flex fuel all i want to to able to see is
E content in the logs
Be careful how many things you power there off a single orange wire, they supply the coils and injectors.
I'm stumped on connecting the fuel line. Is it supposed to be a direct fit to the stock line?
I removed the stock line from the where it runs up into the engine bay and connects to a vapor filter.
I removed the stock line from the where it runs up into the engine bay and connects to a vapor filter.
Yep, thank you.
So this is a little embarrassing but I will share so no one else does this. There is a vacuum line that runs next to the fuel line. This is what I originally pulled and was confused about how it connects since it never could
Anyway the vacuum line is the one towards the outside of the car. For the power wire, use the posi to tap the power wire that is in the DME box all the way to the front. There is only two wire connected there.
I’ve done stupid things too. I think I’ll start a “Doh!” thread.Yep, thank you.
So this is a little embarrassing but I will share so no one else does this. There is a vacuum line that runs next to the fuel line. This is what I originally pulled and was confused about how it connects since it never could
I’ve done stupid things too. I think I’ll start a “Doh!” thread.
Pretty good ones here... http://www.e90post.com/forums/showthread.php?t=1308685
Probably would make a good post on this forum too!
I struggled to work out how to install the sensor and hose until I found that post and looked up the part on realoem. It would be nice if motiv had even a basic guide to point novices like me in the right direction
