N55 3.5 Bar issue *PLEASE HELP*

SilveraA

New Member
May 22, 2020
4
0
0
I am trying to tune my own car and from what I gathered its working great but I've just upgraded turbo and also bought 3.5 bar sensor. My issue is that I want to run 24-25 psi but even if I set load to 220 I can't run above 22.6. I assume I need to not click the 3.5 checkmark on MHD but how do I make the sensor read up to 36 psi ?

I don't want to use JB4 but I think that is the only option I have left
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
I'm not sure on the N55, but the 3.5 check box I thought was for JB4 only or something. The scaling needs to be done on your end in the tune. This is really really rusty info though, hopefully that points you in the right direct.

Someone else feel free to chime in if that is not correct.

@Twisted Tuning
 

SilveraA

New Member
May 22, 2020
4
0
0
Yeah I figured on the scaling part but I found nothing online. It’s really cat and mouse thing. I thought this was my best bet to find any kind of information

I'm not sure on the N55, but the 3.5 check box I thought was for JB4 only or something. The scaling needs to be done on your end in the tune. This is really really rusty info though, hopefully that points you in the right direct.

Someone else feel free to chime in if that is not correct.

@Twisted Tuning
 

Mterkait

Private
Oct 22, 2017
26
4
0
Kuwait
Ride
F30 N55 '13
When you Install a 3.5Bar tmap, you need to change the MHD tune to 3.5Bar readings, or if you have JB4 you set MHD to normal 2.5Bar and change JB4 to 3.5Bar.
 

SilveraA

New Member
May 22, 2020
4
0
0
When you Install a 3.5Bar tmap, you need to change the MHD tune to 3.5Bar readings, or if you have JB4 you set MHD to normal 2.5Bar and change JB4 to 3.5Bar.


That is the issue, I don't know what to change exactly. That is what I am asking.