NCS-Expert error when trying to read from any module!

Ron1776

Lurker
Nov 7, 2018
14
1
0
St. Louis
Ride
2009 335xi E92 (JB4 & xHP)
INPA shows YES & ON, so I close it and open NCS Expert.
Load my profile, hit F1, then F3, select E89, hit OK, select CAS, hit OK and an error pops up:

-----------------------------------------------------------------------------------------------------
FA-Fehler

COAPI-2021: Datenuebertragung zum SG gestoert IFH-0010:
Datenuebertragung interface/Steuergeraet gestoert CAS
COAPI-2021: Datenuebertragung zum SG gestoert FA_READ
COAPI-2021: Datenuebertragung zum SG gestoert FA_READ:
A_E65CAS
----------------------------------------------------------------------------------------------------

If I select NFRM, I get the FG(VIN) and FA(VO#) to populate but when I try to read the ECU, there's a different error:

---------------------------------------------------------------------------------------------------
Error in CABD! Look at CABI.ERR and ERROR.LOG!

COAPI-2021: Datenuebertragung zum SG gestoert IFH-0010:
Datenuebertragung interface/Steuergeraet gestoert FRM_70
COAPI-2021: Datenuebertragung zum SG gestoert
CODIERDATEN_LESEN
----------------------------------------------------------------------------------------------------

Error.log file is attached. Car runs fine. I've coded many times but never seen any of this. HELP!
 

Attachments

  • ERROR.LOG.txt
    2.2 KB · Views: 414

LMB335is

Sergeant
Apr 12, 2017
301
189
0
FOB FL
Ride
13 335is
INPA shows YES & ON, so I close it and open NCS Expert.
Load my profile, hit F1, then F3, select E89, hit OK, select CAS, hit OK and an error pops up:

-----------------------------------------------------------------------------------------------------
FA-Fehler

COAPI-2021: Datenuebertragung zum SG gestoert IFH-0010:
Datenuebertragung interface/Steuergeraet gestoert CAS
COAPI-2021: Datenuebertragung zum SG gestoert FA_READ
COAPI-2021: Datenuebertragung zum SG gestoert FA_READ:
A_E65CAS
----------------------------------------------------------------------------------------------------

If I select NFRM, I get the FG(VIN) and FA(VO#) to populate but when I try to read the ECU, there's a different error:

---------------------------------------------------------------------------------------------------
Error in CABD! Look at CABI.ERR and ERROR.LOG!

COAPI-2021: Datenuebertragung zum SG gestoert IFH-0010:
Datenuebertragung interface/Steuergeraet gestoert FRM_70
COAPI-2021: Datenuebertragung zum SG gestoert
CODIERDATEN_LESEN
----------------------------------------------------------------------------------------------------

Error.log file is attached. Car runs fine. I've coded many times but never seen any of this. HELP!


First, is your JB4 off? Then I'd check your COMM PORT (latency) settings. Sometimes they change for whatever reason. Daten installed?
 
  • Agree
  • Like
Reactions: Boorda and Ron1776