Revshift N54 Motor Mounts

  • Dark Theme is now available. Switch at the bottom of the page or in your preferences.

Revshift

Lurker
Free Vendor
Apr 25, 2018
15
#1
The time has finally arrived!!

Revshift Performance Engineering is proud to announce the First ☝️ Modular Street/Race N54 Motor Mounts for the 335 and 135!!

We have 35 sets of Limited Edition N54 e9x e8x Motor Mounts ready for Pre-Order!!

They are available in Race 95a Green Or Street 80a Black Poly.

Price for this pre-order group buy will be:
$349 shipped within the continental US.

Act now and for only $49 more, at the time of pre-order you get a set 95a and set of 80a bushings!! Ready to rip Street or Race.

Only 45 minutes to swap in your 95a bushings for weekend warrior racing or run the more OE feel 80a bushings for daily driving.

We couldn’t be more proud of how well these turned out. And even more, how well they perform. Don’t wait!! Only 35 slots!!

What’s included:
(2) Billet CNC Motor Mounts
(2) Poly Inserts (95a or 80a)
(1) Hot-Side Heat Blanket
(1) Hardware Pack

* $49 adds the other poly inserts to your order!!

What else? We have Trans Mounts Upgrades available now as well in 95a or 80a for $45!!

There’s more!! The first 35 orders gets a merch package. But Shhhh! It’s a surprise.

All spots available until paid. So please PM.

Payments Via PayPal: [email protected]

All mounts ship within 14 days of payment.

First comment below will update the number of spots left as they fill up and are paid. Thanks!!
21940213-38CF-40EB-ADF9-3C3CB6C92B01.jpeg
8EB156FA-E19E-4A10-809E-68F31008C037.jpeg
5F6730DE-15F7-497F-AACB-78470D7536EF.jpeg
2231D8C4-765F-44E9-B461-0806F29C561E.jpeg
 
Aug 11, 2017
1,614
Virginia
#4
What's NVH like for the poly80 vs stock? This seems to be the $42 question for most people that are not running fully caged race cars.

Filippo
 

Revshift

Lurker
Free Vendor
Apr 25, 2018
15
#5
What's NVH like for the poly80 vs stock? This seems to be the $42 question for most people that are not running fully caged race cars.

Filippo
Nvh is barely increased over the oem mounts. We just got done testing them in a 135i and they feel great. Back to back comparison you can tell a slight difference in nvh at idle. But if I were to get into a car with these 80a mounts thinking it was bone stock I wouldn’t think otherwise when I started it and drove it. From what I have heard about the other mounts out there and their nvh I would say these blow them out of the water. They are very smooth and they keep the motor perfectly still. I have a video of the engine revving and it doesn’t shake one bit. It’s amazing.
 

doublespaces

Administrator
Oct 18, 2016
6,681
AZ
#6
I'm a weird case, I only need a single mount for the driver side since the ADE single turbo kit comes with a dedicated motor mount. What would it cost for me to get just one cnc mount and an 80A insert?
 

Revshift

Lurker
Free Vendor
Apr 25, 2018
15
#7
I'm a weird case, I only need a single mount for the driver side since the ADE single turbo kit comes with a dedicated motor mount. What would it cost for me to get just one cnc mount and an 80A insert?
We can’t sell them individually, sorry. I would not recommend running mismatched motor mounts though. Give our set a try, I don’t think you’ll be disappointed one bit.
 

doublespaces

Administrator
Oct 18, 2016
6,681
AZ
#8
We can’t sell them individually, sorry. I would not recommend running mismatched motor mounts though. Give our set a try, I don’t think you’ll be disappointed one bit.
Then you're going to have to make me one like this:

upload_2018-4-26_9-23-51.png
 
Jun 4, 2017
795
#10
The oem bracket is nice. Part number 22116772154. There is probably a reason why that wont work but at least I tried.
You should really invest some time into learning about this platform and what's already available if you're going to market to us on here. Just sayin'
 

Revshift

Lurker
Free Vendor
Apr 25, 2018
15
#11
You should really invest some time into learning about this platform and what's already available if you're going to market to us on here. Just sayin'
Considering we have a 135i, two 335i's, and an e92 M3 in the shop for r&d, I think we have invested quite a bit into it. Thanks though.
 
Nov 3, 2016
20
#14
Like the fact they have a blanket and swap ability of the bushings. Will hang tight for reviews though
 
Aug 11, 2017
1,614
Virginia
#15
The time has finally arrived!!
We couldn’t be more proud of how well these turned out. And even more, how well they perform. Don’t wait!! Only 35 slots!!

There’s more!! The first 35 orders gets a merch package. But Shhhh! It’s a surprise.

All spots available until paid. So please PM.
Nvh is barely increased over the oem mounts. We just got done testing them in a 135i and they feel great. Back to back comparison you can tell a slight difference in nvh at idle. But if I were to get into a car with these 80a mounts thinking it was bone stock I wouldn’t think otherwise when I started it and drove it.
Stay tuned or don’t. REVSHIFT is here to stay.
Guys, let's give them a chance to show us what they can do
Ok guys, I'm going to put my money where my mouth is. I paypal'd $349 to your account. Look forward to getting the 80a set. Glad to hear they are nearly OE NVH.

Once I've had seat time with them, I will post the install and reviews on my build thread.

Filippo
 
Last edited:
Mar 27, 2018
130
#16
@Revshift are the mounts interchangeable for each side? I may half it with @doublespaces as we both have one solid mount on one side

Also how does the 335iS mount compare to the 80s?
 

[email protected]

Lieutenant
Platinum Vendor
Oct 24, 2016
517
Scottsdale, AZ
#17
We (Tony) sent you guys a PM offering to test the motor mounts on the 900+ whp car that's running ADE's currently (with a solidly mounted sequential transmission), but never heard back from you guys -did that get lost in the shuffle? It would be a good extreme use test bed -shoot me an email if you're up for it. We're still game.

Thanks,
Chris
 
May 16, 2017
28
#18
Nobody mentioned Turners motor mounts. They can be interchanged between two selections 60a and 80a

As for Revshift I appreciate that y'all give us another option to choose from and that y'all are continuing to increase products for the platform.
 

fmorelli

Moderator
Aug 11, 2017
1,614
Virginia
#20
Ok guys, I'm going to put my money where my mouth is. I paypal'd $349 to your account. Look forward to getting the 80a set. Glad to hear they are nearly OE NVH.

Once I've had seat time with them, I will post the install and reviews on my build thread.

Filippo
My motor mounts arrive today. Ordered 4/27 and arrived 5/6 priority mail ... quick. It will be a few weeks before the car is back up on the lift and I can install. So it will be a while before I post more.

On first blush everything looks nice and first rate. Appreciate the Made in USA sticker. My guitars, made with all American products, get the same treatment.

Filippo

IMG_20180506_130039.jpg
 
Last edited:

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads

Top