Sharp Customs N54 Sheetmetal Intake group buy thread.

Discussion in 'N54' started by Sharp, Feb 4, 2017.

Trader History (0)
  1. Sharp

    Sharp Lurker Vendor

    Ok guys, we are ready to get the ball rolling on orders for the group buy. The price will be 540.00 shipped to your door and I would need you to Pm me or reply to this thread with an email to send you a paypal request for payment.

    I have talked to the factory and they will reopen this coming Monday and will take 2 to 3 weeks to complete depending on how many orders we can get in. Then add a week or so to get everyone on board and then another week for shipping and we are looking at beginning to middle of March.

    These will all come in the textured anodized black with all the hardware and gaskets that were shown on Steven's post here> https://bmw.spoolstreet.com/threads...ntake-manifold-testing-and-future-review.814/

    upload_2017-2-4_1-12-16.png
    upload_2017-2-4_1-8-21.png
    Again, just post or PM me your email address and I will send a request.



    so far i have:
    MachineMade919 black
    Sshec152 polished
    redbullgotwings polished
    Jburner82 black
    Clintmemore black
    Ezkillz polished
    Yeezus335i Polished
    screaminfast black
    Jamesbuk 2 in Black
    camberadam black
    mirzaik black
    frankenturbo black
    onehotdroptop black
     
    Last edited: Mar 22, 2017
    • Like Like x 2
    • Winner Winner x 1
    • Optimistic Optimistic x 1
    • List
  2. Snelson3003

    Snelson3003 Corporal Vendor

    [Admin edit to save you from getting spam]
     
  3. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    you guys shouldn't post your email here, spammers will pick it up. Just send an email and post here when you're done that way he can be sure to check for a message from you.
     
  4. MachineMade919

    MachineMade919 New Member

    1
    Cool. Conversation started
     
  5. Bigdaddyaaron

    Bigdaddyaaron Corporal

    inb4 hot single milfs are in your area
     
  6. Tuningservice.no

    Tuningservice.no Private Vendor

    29
    Yeeep, i'm up for one. PM'd
     
  7. just want to make sure the picture posted isnt the version we are being sent correct? There were some new versions since that one was made.
     
  8. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    Pretty certain he will be sending you the revised manifold. This was just a photo he had off hand most likely.
     
  9. that was my thought. just wanted to be clear before i commit.
     
  10. Sharp

    Sharp Lurker Vendor

    Yes, correct it will be the updated version on Stevens thread. I can also order in polished if you guys would like.
     
    • Like Like x 1
    • Informative Informative x 1
    • List
  11. I would love a polished one.
     
  12. Snelson3003

    Snelson3003 Corporal Vendor

    Guys i will be hitting the dyno this week to test on my new setup and show how the PI affects the overall performance on the N54. Last Dyno was 498whp @ 19psi on E50 fuel. This new one will be all out at 24psi on 100% E85 w/PI and the SC manifold. BE EXCITED.
     
    • Like Like x 1
    • Optimistic Optimistic x 1
    • List
  13. I'm just waiting for some results with the PI before I place my order. What injectors and controller are you using? What about fuel lines?
     
  14. Snelson3003

    Snelson3003 Corporal Vendor

    Fuel line is a 6AN line that I bought in a 1 foot section and cut to size. Injectors are the FAST LS7 39lb units I got for $180 (all 6)

    And as a BMS product fan boy I'm using their BMS PI controller which works incredibly well.
     
  15. Payam@BMS

    [email protected] Private Vendor

    37
    Link to the injectors?

    I personally love the BMS PI controller as well. It's so easy to use and dial in, and all the safety it provides you can't beat it for the price.
     
  16. Snelson3003

    Snelson3003 Corporal Vendor

  17. Snelson3003

    Snelson3003 Corporal Vendor

    Also guys, if you want a more robust setup that has very little "piecing together" you can always buy the EOS PI Fueling kit (NOT the manifold).

    ECS sells the kit for cheap and is everything you will need including the Bosch EV14 52Lb/hr injectors. - i would have bought this if it was available when i started honestly.
     
  18. Will this fit the 535i xdrive with no fitment issues?
     

Share This Page