ShocknAwe - 2010 1er Mutt Build Thread

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
Figured it's time to put this here as it seems I'm becoming more and more involved on SpoolStreet. Going to take me a couple days to copy and paste from 1addicts so bear with me. For the 1ers among us, I will always be active with 1addicts, so if you cant reach me here for something, try there.

This is the photo-diary history of my 135i from stock to current. Unfortunately some parts that are on the car, or have been part of the cars history have either been lost or were neglected and haven't been photographed.

The first picture will be semi-regularly updated as the build changes to reflect the current state of the car! I'm not much for words here, and I'll let the pictures do the talking.

Last Known State of Affairs:

e5JFlaI.jpg


29aYyWW.jpg



Current Modifications:

Engine/Fueling/Exhaust/Cooling
MadDad Whisper Exhaust
MHD S2+ 95/102 Pump - flash only
Precision Raceworks Stage 2+ Modular LPFP
Precision Raceworks N54 Coils and upgraded pencils
NGK Plugs - 1 step colder, 0.022"
BMS 3" Downpipes
BMS DCI
BMS 7.5" RACE FMIC + 2.5" J-pipe
Evolution Racewerks 50mm Charge Pipe - Anodized Black Finish
TiAL Q 50mm BOV - Black
Vader Solutions 1/4" BOV adapter
Modified OEM BMW Clutch Delay Valve
Spring Bolt Delete


Suspension & Chassis
Coils
YCW custom coilovers
YCW M rear dampers
YCW Camber Plates
YCW Isolators
Fe1rx front spindle spacer
Swift Springs - 6k Front
Swift Springs - 18k Rear
Swift Thrust Sheets - 65mm rear
Dinan Rear Upper Shock Mounts

Arms & Bars
Meyle HD Front Sway Bar Links
OE BMW 135i Front Sway Bar
OE BMW 135i Rear Sway
TRW M3 Front Wishbones
TRW M3 Front Tension Struts
TRW M3 Rear Wishbones
TRW M3 Rear Guide Rods
OE BMW M3 Rear Lower Camber Link
HP Autowerks M3 rear headlight leveling bracket
Fe1rx custom "M3" Rear Toe Arms

Mounts
OE 1M Strut Brace
Rogue Engineering Transmission Mounts
Bimmerworld Aluminum Rear Subframe Bushings
135droptop Differential Lock Down Brace

Driveline
BMS Short Shift Kit
Drexler Clutch LSD: 40/10 ramps
YCW reinforced lightweight rear axles

Brakes
Racingbrake 2-piece Floating Hybrid Slotted-Drilled Iron Rotors - Front & Rear
Racingbrake Street Compound Pads


Wheels & Tires
APEX EC-7 Anthracite Wheels - 18x9.5 et 22 Front, 18x9.5 et 58 Rear
Michelin Pilot Sport 4S Tires - 275/35/18 Square


Body & Cosmetic
OE BMW 1M Front Conversion
Lightweight Titanauspuffanlagen MotoGP 1M Front Lip - Gloss Black
iND 1M Sidemarkers - Custom finished in Black Chrome
OE BMW Performance Carbon Fiber spoiler - Painted Jet Black
OE BMW LCI Black Line Tail Lights
OE BMW E46 ZHP Shift Knob
OE BMW 1M Floor Mats
OE BMW Matte Black mud guards Front and Rear
OE BMW Matte Shadowline plate frame
Redline Goods Italian Leather Shift & Brake Boots
Matte Black custom mesh vented OEM diffuser
Matte Black Kidney Grilles
CSR Eyebrows - Painted Jet Black
PIAA Plasma Ion Yellow 2500k H8 Corona Ring bulbs
Coded AE Max Voltage, Corners Off, Windows Up on Key, Folding Mirrors on Key


Fluids
Redline MTL transmission fluid
German Castrol 0W40 BMW LL-01 engine oil


Parts Bin! (awaiting install)
iND Black Chrome Kidney Grilles
Rieger quad diffuser
F82 M4 Front Uprights
E46 M3 CSL BBK Front Rotors (ECS 2pc)
Hydra Performance CSL Rotor adapter
Hydra Performance N53 ported/drilled head
Hydra Performance SS cast HP800 turbos with N53 turbofolds
Hydra Performance relocated turbo outlets
Hydra Performance high flow 3" inlets and hybrid aFe GT Momentum sealed intake
Hydra Performance PCV system
Schrick Low-lift cams
X-Clutch Organic Twin-Disk Clutch
RevShift 80A Engine Mounts
Ohlins/3DM E82 1M Coilovers

Stock:

lWAZNmY.jpg

3e1ckCw.jpg

SM4poga.jpg

Z9f6Fj6.jpg





Added Ebay Performance Replica Spoiler:

wmtAuVe.jpg





Black Slat Kidneys:

iH4AchX.jpg





CP-e DCI:

pXx3SnF.jpg





Disaster! Turns out it buffed right out!:

yq163jG.jpg





Front Duct Mod & Alufelgen SF-71 19" Wheels w/ Vredestein Ultrac Sessanta tires (225F/255R), Full 360* Ceramic Tint:

FRgHlE0.jpg





Mudguards (rear), Debadged 135i emblem, and Berk exhaust:

MJtYK29.jpg

l2QkqmB.jpg





Matte Black Diffuser Project:

FMzctxl.jpg

O4MvyrH.jpg





A little suspension work - Bilstein dampers paired with Swift Spec-R springs M3 Wishbones, and plugged up those pesky (squishy) RSFBs:

ID1ksEL.jpg

udF0vOd.jpg





Matte Black Kidneys & upped the voltage on the angel eyes:

3yHxMMM.jpg
 
Last edited:
  • Like
Reactions: Hydra Performance

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
Deleted the sun visor airbag warning labels:

opqnqMx.jpg





Custom Italian Leather boots (courtesy of Redline Goods) and ZHP shift knob:

mUZWT2g.jpg

w6EOJO9.jpg

ItptcL2.jpg





Matte Black CSR Eyebrows (Thanks HondaGoneRogue!), external suspension, Vredestein Ultrac Vorti tires (increased to 235F/265R):

HYOUaoB.jpg





MadDad Whisper Exhaust, OEM BMW Performance CF Spoiler painted Jet Black, went back to N54 mids and stock DPs:

29aYyWW





BMS 3" Downpipes

AM8rJLk.jpg





Spring bolt delete:
Yellow zinc hex bolts with appropriate stop length to match the springs. Separate nuts. Not ever having to worry about those soft threads or nuts on the midpipe ever again is a huge plus.

jC8qlH6.jpg





H&R 27mm Front Sway Bar and Rogue Engineering Transmission Mounts

oGjw17L.jpg

HDbSM37.jpg

69wvtl4.jpg





DEPO Smoked Amber LED Sidemarkers

begmzAA.jpg

QIsLTIn.jpg





Dinan Rear Upper Shock Mount Kit
10mm extra shock travel!

CEU6baH.jpg

7mi5LeA.jpg





OE BMW LCI Black Line Tail Lights
An Absolute must on modified BMWs, the Black Line/Darkline styling sets off every paint color I have seen.

AROz4Hx.jpg





CX Racing "Big Tom" FMIC
3" CX Racing core, custom silicone cold and hotside piping, T-bolt clamps. No leaks is essential.

1lzNAJp.jpg

eQzRxXg.jpg

qOERecm.jpg





Evolution Racewerks CP and TiAL Q 50mm BOV
Two (real) options for BOV on our platform, TialQ or Turbosmart. I prefer the Q as it is quieter and a little more OEM+

PVpqKOy.jpg





Differential Lock Down Brace
Welded steel. Several years on the road with DD use, no issues! Thanks 135droptop!

dZJLAJs.jpg
 
Last edited:

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
TC Kline S/A Coilovers: - 350f/600r
First iteration of coilovers. These are really good bang for the buck, especially up front.

amU0uuO.jpg

HcRa1U5.jpg





BMS Short Shift Kit: - ~30% reduction in shifter throw, ~1cm height reduction
~30% reduction in shifter throw, ~1cm height reduction. Best part is my ZHP knob fit perfectly.

aJN5ttX.jpg





Swift Springs and Thrust Sheets: - 392/7k front spring rate

NfRReDJ.jpg





Swift Springs and Thrust Sheets: - 672/12k rear spring rate

4SFvy5P.jpg





Fe1rx Rear Lower Spring Isolator:
Pad for the lower race spring in the rear. Most coilover kits do not include this, and Fe1rx had a spare set, machined to fit the contour of the arm.

Tt1X7bm.jpg
HleP9I4.jpg

xfOKz1d.jpg





Precision Raceworks Stage 2+ Modular LPFP:
Single Walbro 450, ethanol rated fuel pump. No issues 30k+ miles DD.

MJWFtYC.jpg





Racingbrake 2pc Floating Rotors
Weight savings ~4lbs per corner (front and rear) with increase in rotor vanes and width to 28mm.

6TG6ekr.jpg





BMW Performance 6MT Pedals
Another must have for 6MT BMWs. No more slippery pedals when wet.

39NtYZs.jpg





YCW Front and Rear coilovers - 6k front 18k rear
Next step in trying to perfect the suspension after deleting nRFT. Better valving and compression than the TCKs, but rougher on the street.

XQW6hMH.jpg

lO0nGKm.jpg





Fe1rx ///M Rear Toe Arms
Perfect addition to the YCWs. I disliked having to regularly clean the rust off my spherical toe arms.

HPxEf5q.jpg





APEX EC-7 Rear Wheels - 18x9.5 et 58 (275/35 MP4S)
The hunt for better grip. MPSS were vastly inferior. Plus, these are bigger in every dimension. RB Rear rotors seen here as well!

ySZg3wW.jpg






Bimmerworld Carbon Fiber Sunroof Delete Plug
Deleting ~40 lbs from the roof. No brainer.

gU1HMKM.jpg





OE BMW 1M Anthracite Slicktop Headliner
Lets get that added headroom, easier to clean and recover if it wears out. Downside, ridiculously expensive and had to be imported.

Xo3kfgB.jpg





OE BMW 1M Front Conversion - With Lightweight MotoGP Lip
First shot. Did this in my garage on jack stands. Also includes image of the BMS 7.5 RACE FMIC.

uvsInua.jpg





APEX EC7 Front Wheels 18x9.5 et 22 (275/35 MP4S)
The 1M front clip allowed me to square up the wheels and tires. 275/35 MP4S with no rubbing while driving. This is how the front end was meant to be!

UcSB1aE.jpg





BMS 7.5" RACE FMIC & 2.5" J-pipe
Getting serious about IAT control. 90-100 degrees with 99% humidity is tough to combat, but lets see how this does. No idea how people fit a 3" up pipe in there. Dangerously close to my serp.

cDh6Fcd.jpg

yW2rWCX.jpg





Drexler Clutch Type Limited Slip Differential - 40/10 Ramps
Built and imported from Germany by limitedslip.de. Thanks to Omar@HydraPerformance for helping me order this!

u6WBto8.jpg
 

Attachments

  • lO0nGKm.jpg
    lO0nGKm.jpg
    166.7 KB · Views: 65
  • HPxEf5q.jpg
    HPxEf5q.jpg
    162.7 KB · Views: 67
  • ySZg3wW.jpg
    ySZg3wW.jpg
    272.4 KB · Views: 65
  • gU1HMKM.jpg
    gU1HMKM.jpg
    226.7 KB · Views: 63
  • Xo3kfgB.jpg
    Xo3kfgB.jpg
    131 KB · Views: 60
  • uvsInua.jpg
    uvsInua.jpg
    414.4 KB · Views: 66
  • UcSB1aE.jpg
    UcSB1aE.jpg
    175.3 KB · Views: 64
  • cDh6Fcd.jpg
    cDh6Fcd.jpg
    244.3 KB · Views: 64
  • yW2rWCX.jpg
    yW2rWCX.jpg
    192 KB · Views: 61
  • XQW6hMH.jpg
    XQW6hMH.jpg
    203.8 KB · Views: 64
  • 39NtYZs.jpg
    39NtYZs.jpg
    55.2 KB · Views: 63
  • 6TG6ekr.jpg
    6TG6ekr.jpg
    69.7 KB · Views: 64
  • amU0uuO.jpg
    amU0uuO.jpg
    147.3 KB · Views: 64
  • HcRa1U5.jpg
    HcRa1U5.jpg
    133.5 KB · Views: 62
  • aJN5ttX.jpg
    aJN5ttX.jpg
    67.7 KB · Views: 65
  • NfRReDJ.jpg
    NfRReDJ.jpg
    64.4 KB · Views: 63
  • 4SFvy5P.jpg
    4SFvy5P.jpg
    59.6 KB · Views: 64
  • Tt1X7bm.jpg
    Tt1X7bm.jpg
    92.1 KB · Views: 65
  • HleP9I4.jpg
    HleP9I4.jpg
    80.2 KB · Views: 64
  • xfOKz1d.jpg
    xfOKz1d.jpg
    58.2 KB · Views: 62
  • MJWFtYC.jpg
    MJWFtYC.jpg
    54.4 KB · Views: 63
Last edited:

fmorelli

Lieutenant General
Staff member
Aug 11, 2017
3,748
3,592
0
57
Virginia
Ride
E89 Z4 35i, F10 535d
Woaw ... just went through the photo tsunami. Nice looking car! Waiting on the rest (given the reserves), and well, that I have a few guesses :tonguewink:

Filippo
 
  • Love
Reactions: ShocknAwe

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
Thanks Filippo. The reserves are due to the 30 picture limit per post. Dunno that I'll need them but.. yeah. Lots of photos coming once I get the camera out.

Woaw ... just went through the photo tsunami. Nice looking car! Waiting on the rest (given the reserves), and well, that I have a few guesses :tonguewink:

Filippo
 

alarcon

New Member
Nov 5, 2017
7
2
0
When do you plan on installing the M4 uprights and CSL rotors? Looking forward to your thoughts on the whole set up.
 

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
@ShocknAwe Any update or more details you can share about the M4 spindles and suspension changes needed to make it work?

Need spindles/uprights and pinch bolts, speed sensor bolt, and hub bolts. Then I recommend the Hydra caliper bracket if sticking with E82 calipers, and use E46M3CSL rotors. Or convert to full F8x brakes.

Stock wheel bearing fits with M4 hub bolts.

You will need E9xM3 front dampers and top hat/plates which match our strut towers.

Mine fit fine with nonM steering rod ends.

Think that's it off the top of my head.

I'll post my new alignment spec once I know what it is lol. Assembled with Dinan fixed plates so we'll see what that nets me with the full M suspension.
 
  • Like
Reactions: alarcon

fmorelli

Lieutenant General
Staff member
Aug 11, 2017
3,748
3,592
0
57
Virginia
Ride
E89 Z4 35i, F10 535d
@ShocknAwe your 3DM Motorsport stuff in yet? Looks like my stuff will be on the car in the next 1-2 weeks, along with the big brakes. Been working on this part since end of last year - I'm chomping at the bit to feel like we've made progress somewhere. @barry@3DM has cranked out what looks to be a juicy setup. Can't wait ...

Please post back here on progress on your car. :grin:

Filippo
 

ShocknAwe

Captain
Jan 24, 2018
1,472
1
729
0
Charleston, SC
Ride
N54/3 1er ///Mutt
@ShocknAwe your 3DM Motorsport stuff in yet? Looks like my stuff will be on the car in the next 1-2 weeks, along with the big brakes. Been working on this part since end of last year - I'm chomping at the bit to feel like we've made progress somewhere. @barry@3DM has cranked out what looks to be a juicy setup. Can't wait ...

Please post back here on progress on your car. :grin:

Filippo

It is. Haven't really seen my car in 3 months, installed the parts and it swiftly went to the body shop, upholstery shop. And then Indy mech for the Hydra stuff.

Hoping to pick it up today or tomorrow.
 
  • Like
Reactions: fmorelli and Torgus

Blaster3500

Sergeant
Nov 5, 2016
296
247
0
SC
Awesome build! Refreshing to still see quality builds on this platform. Do you live in South Carolina?