Single turbo filters

[pysical]

So the filter will fit if I smash it down a little. I also grinded the vents a little on hood.

 

[Terry@BMS]

Not ideal but workable.

 

[gingerbreadman]

Not ideal but workable.

Terry, is your shorty filter similar in size to Docrace's?

 

[Payam@BMS]

Terry, is your shorty filter similar in size to Docrace's?

We have x2 different sizes, but yes similar. Our intakes are silicone, unlike others which eventually burns

BMS Silicone Single Turbo Filter 4.5" 3.75"- BurgerTuning.com

This all Silicone filter is designed to stand up to the heat and rigors of being installed directly to a turbo flange and offers 60% more surface area than the typical undersized K&N RU-2510 filter.

www.burgertuning.com

 

[Abacus38]

#AnotherReasonToGoBottomMount

 

[gingerbreadman]

#AnotherReasonToGoBottomMount

ya...i just came off that bottom mount tip. I bought a bottom mount mani that wasn't proven and it was crap. Not going with another unproven system so went with DR.

 

[Blaster3500]

Trying to remember ,it was a single turbo top mount,think was a white car,was few yrs back.will try to dig it up

I think the first pic is the white car you are talking about. Both appear to be 3". I believe motivs kit runs a 3" intake tube so I would assume not a huge power loss.

 

[The Convert]

I think the first pic is the white car you are talking about. Both appear to be 3". I believe motivs kit runs a 3" intake tube so I would assume not a huge power loss. View attachment 26681View attachment 26682

The motiv kit has a very small length of intake plumbing. So, that alone will make a decent difference.

 

[BOosted 335i]

I think the first pic is the white car you are talking about. Both appear to be 3". I believe motivs kit runs a 3" intake tube so I would assume not a huge power loss. View attachment 26681View attachment 26682

yup that was it the 1st picture

 

[gingerbreadman]

I think the first pic is the white car you are talking about. Both appear to be 3". I believe motivs kit runs a 3" intake tube so I would assume not a huge power loss. View attachment 26681View attachment 26682

This would be a great option as it offers an easier way to route the pcv. Just hoping there aren’t any performance disadvantages

 

[Rob@RBTurbo]

I think the first pic is the white car you are talking about. Both appear to be 3". I believe motivs kit runs a 3" intake tube so I would assume not a huge power loss. View attachment 26681View attachment 26682

These look like great alternatives to me.