I’ve been running the Forge DVs for 5-6 years. They are fine. Vent to intake no problem except the vent hoses are sometimes in the way of things like the OCCs. I also moved up from the yellow to the blue springs. Not bad overall.
Vader Solutions BOV adaptor
- Thread starter Davidwarren
- Start date
The only qualm I had (which is very insignificant) is the mounting hardware, I can't seem to get that "bottom out" feeling of tightness , just screwing in forever but it appears tight like I can't rip it out by hand force.
Tap the manifold, it's not difficult. Of course I had mine out of the car when I added a couple of nipples, but the actual work took about 15 minutes.
Omar ordered mine July 30th but haven't been able to see any tracking info just it was labelled... Here is current info as of 8/2/18 9:00pm Eastern Time... >>>
Your package is on its way to a USPS facility. Sign up to get updates, and we'll send you a delivery date and time when available.
Status
Pre-Shipment
July 30, 2018 at 10:47 am
Shipping Label Created, USPS Awaiting Item
SCOTTSDALE, AZ 85257
Your package is on its way to a USPS facility. Sign up to get updates, and we'll send you a delivery date and time when available.
Status
Pre-Shipment
July 30, 2018 at 10:47 am
Shipping Label Created, USPS Awaiting Item
SCOTTSDALE, AZ 85257
Lol I waited over 2 weeks for mine, consider yourself lucky. Product is excellent.
Anyone have issues like screwing it into the manifold? Like not feeling it’s bottomed out or tight enough? I don’t wanna keep going and destroy more plastic
I suggest putting a little silicone grease (same as dielectric grease) on the o-ring to make sure it seats down well before screwing in the adapter.
yea i refunded you for the silicone line..out of stock unfortunatelyMine came today... But NO 2ft Vacuum Hose Included!!!
@Omar@VaderSolutions Could I also have an update on order #1628?yea i refunded you for the silicone line..out of stock unfortunately
