Vader Solutions BOV adaptor

JuniorB

Sergeant
May 9, 2017
343
112
0
Rhode Island
Ride
07 e60
Mom
IMG_20181129_182306709.jpg
IMG_20181129_182316402.jpg
 
  • Like
Reactions: Sshec152

JuniorB

Sergeant
May 9, 2017
343
112
0
Rhode Island
Ride
07 e60
I used a couple swivel 1/4 pushloc fittings, it's a clean and fuctional. I has this off for a blast that I done, found this spot under the TB.
 

Rob@RBTurbo

Lieutenant
Dec 7, 2016
626
401
0
St. Louis, MO USA
www.rbturbo.com
Ride
'08 335i, '14 M6, '15 Tundra
Then again, I tryed to inquire a couple of fittings from RB Turbo,,as to no reply either.

We are 99.999999999999% on email responses within 1 business day, most often same day, very seldom 2 business days. The only exception is perhaps if there are 4 bazillion questions followed up by can you also do 90% off too?

So if this isn't you and you had sent a reasonable email- that is sincerely looking for a part we 100% would've responded as we do regularly (we cater to special requests and sell parts a la carte weekly). In short you may want to check the email address you used and/or resend if still needed.

Thanks,
Rob
 
  • Like
Reactions: Rob09msport

JuniorB

Sergeant
May 9, 2017
343
112
0
Rhode Island
Ride
07 e60
I hope it was legit, I needed them. I was looking for fittings a pvc delete, and throttle body adapter to run a cc. I already done the rest, and didn't know if they were available. I didn't hear back as I must be that 1% of emails that doesn't get a respond. I figured since it didn't include the word turbo, it must of been passed along.... I got them anyway, and it wasn't from VTT.
 
  • Like
Reactions: Torgus

fmorelli

Lieutenant General
Staff member
Aug 11, 2017
3,748
3,592
0
57
Virginia
Ride
E89 Z4 35i, F10 535d
I figured since it didn't include the word turbo, it must of been passed along
Guess you figured wrong, eh. I just bought PCV delete stuff ala cart from Rob via email.

Vader Solution BOV is elegant, once attached with properly sized Torx fasteners. I'm actually running my low-side PCV under the intake, which is a smart thing to run at that bottom center of the intake if one understands how the PCV system works. I used a Vibrant bulkhead fitting for the low-side PCV with push-loc fittings.

Filippo

00100lPORTRAIT_00100_BURST20181125144139263_COVER.jpg


IMG_20181001_173935.jpg
 

Rob@RBTurbo

Lieutenant
Dec 7, 2016
626
401
0
St. Louis, MO USA
www.rbturbo.com
Ride
'08 335i, '14 M6, '15 Tundra
I hope it was legit, I needed them. I was looking for fittings a pvc delete, and throttle body adapter to run a cc. I already done the rest, and didn't know if they were available. I didn't hear back as I must be that 1% of emails that doesn't get a respond. I figured since it didn't include the word turbo, it must of been passed along.... I got them anyway, and it wasn't from VTT.

Something tells me you simply did not have the email address correct. It’s on our website. Glad you got it all resolved.
 

hellokitty

Specialist
May 23, 2018
73
32
0
Ride
2012 335iS DCT E93
Like to place an order, but not sure if Vader Solutions have any more in stock? Lead time and delivery from the past post worries me.

I'd like to place an order but would like confirmation from Vader Solutions, which I did try to reach out to Omar, but no response.

Ordered last week. Shipping label created same day but hasn't shipped.
 

Sshec152

Corporal
Nov 3, 2016
213
118
0
Aston pa
For some reason, this block seems to be out of place sitting on this intake,, all tho some may belive this is just an awesome piece of sculpture, some thought could have gone into this instead of a block of aluminum sitting on a plastic intake. I do give VS props for coming up with a pnp for an easy mani tap, on the other hand, if you can't ship this thing out complete with a piece of hose within 24 hrs, stop offering it. I'm not understanding why you have to make someone wait 2weeks for this. Then again, I tryed to inquire a couple of fittings from RB Turbo,,as to no reply either. The mechanic in me done a different approach for a bov tap.
Its funny how he’s the one that pushes jpworkz sheisty business and he runs his business the same way. When i called him out on it on Facebook him and his butt buddies started dick riding
 
  • Like
Reactions: veer90

ion619

New Member
Nov 30, 2018
5
1
0
Ride
2009 335i
Ordered last week. Shipping label created same day but hasn't shipped.

Hellokitty… Keep me posted on your order.. tried to reach out to Vadersolutions (via email) no response... Not sure how much inventory they have or why delay in shipments.

Thanks!
 

ion619

New Member
Nov 30, 2018
5
1
0
Ride
2009 335i
Hellokitty… Keep me posted on your order.. tried to reach out to Vadersolutions (via email) no response... Not sure how much inventory they have or why delay in shipments.

Thanks!

Just got an email from Omar (Vader Solution) and he said the adapters are currently in anodize and will ship on Thursday. At least there is response from Omar with direction on the adapter. Will be placing order...
 

JuniorB

Sergeant
May 9, 2017
343
112
0
Rhode Island
Ride
07 e60
Well,,we've seen how some guys get in the front of the line without being in the line. I'm 100%" the email was sent, seeing it was on your site.I'm sure it was over looked as it was only a couple fittings. I appreciate the response here tho, as I should of just asked here.
 

Rob@RBTurbo

Lieutenant
Dec 7, 2016
626
401
0
St. Louis, MO USA
www.rbturbo.com
Ride
'08 335i, '14 M6, '15 Tundra
Well,,we've seen how some guys get in the front of the line without being in the line. I'm 100%" the email was sent, seeing it was on your site.I'm sure it was over looked as it was only a couple fittings. I appreciate the response here tho, as I should of just asked here.

What sounds sure is that you for whatever reason have a significant chip on your shoulder- and that the non-receipt of email was likely a large blessing in disguise.
 

Omar@VaderSolutions

Lieutenant
Premium Vendor
Oct 19, 2016
535
409
25
NY & AZ
vadersolution.com
Ride
N54 135i & N54 335i
hey everyone, my wedding was last friday, today is my first day back in the office, i have a box full of BOV adapters that are getting packaged up and leaving today among other things... im on top of emails if anyone has any concerns. thanks again for the support, and im sure rob is on top of emails too, i never seen an issue with robs communication... as for the jpworks comment, nah ill pass i no longer support him..im highly against him now. long story short he f'd me over as well along with others that are close to me
 

Rob09msport

Major
Oct 28, 2017
1,929
664
0
Monroe CT
Ride
09 335i msport le mans 18 x5
We are 99.999999999999% on email responses within 1 business day, most often same day, very seldom 2 business days. The only exception is perhaps if there are 4 bazillion questions followed up by can you also do 90% off too?

So if this isn't you and you had sent a reasonable email- that is sincerely looking for a part we 100% would've responded as we do regularly (we cater to special requests and sell parts a la carte weekly). In short you may want to check the email address you used and/or resend if still needed.

Thanks,
Rob
Rob has excellent response times and hasn't had any bad cust service complaints in a long time afaik.
I have got to be the most annoying customer and their def isn't any relationship with me and rob we have disagreed plenty if you check post history, but when I emailed questions I received responses within hours and they werent amex or discover type questions they were technical pretty obvious no big money questions.

Ps best part of our debates is I can always say rob was right no matter If I'm right or wrong.