VTT Single Barrel Noise

[TJ Jrackers]

I've been running a VTT single barrel for a few months now and have been happy with the performance, however, recently it sounds like the bearings have been going as it has a high pitched squealing noise when the bearings are cold.

Has anyone else had a similar issue? Is there anything that can be done without sending it back to Vargas as I'm in the UK so that wouldn't be viable?

Cheers

 

[fmorelli]

@Chris@VargasTurboTech - email him [email protected] ... they should be able to give you the best suggestions.

Filippo

 

[Chris@VargasTurboTech]

High pitched squealing when cold is almost always a slipping belt. If you did not replace your idlers, and tensioner when installing the kit, we have seen this cause issues many times. Make sure your belt system is in perfect working order, including all idlers, PS pulley, and tensioner. Issues like this can always be addressed by a simple email [email protected].

Chris