Hey all - Is it a bad idea to use dielectric grease on low voltage electric connectors such as the fuel pump, injector, and Boost solenoid connectors?
I just replaced my valve cover and had greased pretty much everything involving wiring points.
For some reason Im now getting HPFP codes which seems like too strong of a coincidence.
Is it possible the grease is adding too much resistance and was a poor call? e.g - could the HPFP sensor be sending incorrect readings?
I just replaced my valve cover and had greased pretty much everything involving wiring points.
For some reason Im now getting HPFP codes which seems like too strong of a coincidence.
Is it possible the grease is adding too much resistance and was a poor call? e.g - could the HPFP sensor be sending incorrect readings?