Hello!,
I am reverting my car back to stock for inspection and swapped out my Injen Intake for a stock one the other week. Immediately after install the car begin to run rough or not idle at all. It threw a ton of misfire and lean codes too. I was able to "fix" the idle issue mostly by unplugging the MAF. Although even with MAF unplugged the car still occasionally will die at idle and throw the codes.
I have tried cleaning the MAF, and replacing it with another MAF and the problem persists.
Intake seems to be installed correctly. I have also reset idle adaptations on MHD and it seemed to help just a little at first but still having issues.
After a little bit of driving the car will smoothen out and run mostly fine with MAF unplugged but I'm still getting codes.
Stock Downpipe
MHD Stage 1
Stock Intake
VRSF 7.5 FMIC
VRSF CP
Thanks!
I am reverting my car back to stock for inspection and swapped out my Injen Intake for a stock one the other week. Immediately after install the car begin to run rough or not idle at all. It threw a ton of misfire and lean codes too. I was able to "fix" the idle issue mostly by unplugging the MAF. Although even with MAF unplugged the car still occasionally will die at idle and throw the codes.
I have tried cleaning the MAF, and replacing it with another MAF and the problem persists.
Intake seems to be installed correctly. I have also reset idle adaptations on MHD and it seemed to help just a little at first but still having issues.
After a little bit of driving the car will smoothen out and run mostly fine with MAF unplugged but I'm still getting codes.
Stock Downpipe
MHD Stage 1
Stock Intake
VRSF 7.5 FMIC
VRSF CP
Thanks!