RHD Long Runner Single Turbo

Brule

Sergeant
Feb 20, 2017
371
440
0
Ride
335i 2007 6spd manual
Heres a manifold I'm making.

Always wanted a long runner manifold so I'm making one.

Few photos of the progress.
20220529_160250.jpg
20220529_160257.jpg
20220602_093638.jpg
20220602_093651.jpg
 

Attachments

  • 20220602_095947.jpg
    20220602_095947.jpg
    195.8 KB · Views: 5

rac

Sergeant
Nov 14, 2016
341
204
0
Australia
Ride
135i ST
You would have to be Houdini to get the lower nuts onto the manifold head studs Brule.

same here for my long runner. looks impossible but the trick for mine is to have some nuts made up to the studs and then make them up at the same time as the others, and one nut i modified to be shorter. and i'd rather slam my dk in a door than get my water pipe out again which is what i did recently...

long runner.jpg
 

Brule

Sergeant
Feb 20, 2017
371
440
0
Ride
335i 2007 6spd manual
You would have to be Houdini to get the lower nuts onto the manifold head studs Brule.
Runner 3 bottom will require stud to be cut to get nut on it. Probably a half hour nut tightening session on that one.

The rest are alot easier then the other 2 manifolds due to the runner size and they all come off the head heaps which allows room.👍🏻
 
  • Like
Reactions: Torgus