Abacus38 2007 e92 335i build
- Thread starter Abacus38
- Start date
Went to start the car today to check for leaks and the ECU died. Mosfets #3 is dead. I'm just going order new mosfets and dropped it off at the TV repair shop. It should cost $50 bucks at most
You are probably aware, but be careful with what they use to do the repair. I think an air station is required, if they use an iron they will ruin your DME.
Yup thats why im dropping it off at the tv repair shop since they have one.
Did some test pulls today but the car is misfiring in cylinder 3 right when full boost hits which is funny because that was the same cylinder that the mosfets died on. I have PR coils and new spark plugs but i've haven't changed the injectors yet. I'm still on Index 9 so I'm leaning to it being a bad injector. I'll swap coils and pulled the sparks first before trying to upgrade to Index 12 injectors
If you do upgrade to index 12 injectors, get the new s63 ones.
https://blog.fcpeuro.com/difference-between-direct-fuel-injector-13538648937-and-13538616079
https://blog.fcpeuro.com/difference-between-direct-fuel-injector-13538648937-and-13538616079
So that is how people are getting those injectors for ~$700? Part number: 13538648937
Thanks for the heads up! I will be picking up those and the PR injector tool next Friday
Also my an fittings and the 10mm x 1.0 to -4an adapters came in today. I got them on eBay for $12 from this seller https://m.ebay.com/itm/40-2-41-4AN-...tegate-Blue-/182985642908?txnId=1768709322008
However Jake is going to start selling wastegate lines kits soon so you might not have to go through the hassel of making your own lines
However Jake is going to start selling wastegate lines kits soon so you might not have to go through the hassel of making your own lines
The S63 injectors aret’t new. My dealership has been shipping these exclusively for over a year. They have the same problems as the other index 12’s. Noticed zero difference in longevity, or performance with them. Most dealers if you order injectors are shipping these. You have to ask for the more expensive ones directly to not get the S63 version
I'm assuming since you push injectors harder than just about anybody, was curious what kind problems you experienced with them?
