Anyone on here understand the aquamist system? I have emailed Jeff at howerton & while he is great at shipping parts. I find he is not very interested in troubleshooting. Most of his reply's are very short or right out of the manual.
Anyways I was using my aquamist HSF-4 with nozzles in the charge pipe. I bought the fuel-it meth system & the only thing I changed was I teed into the 6mm supply line before the fav to supply the fuel-it system. After the fav i still have a small single nozzle to the charge pipe.
Problem is the system turns on normally, But under boost I have no flow bars? So I dont know if it is activating or not. Any ideas?
Anyways I was using my aquamist HSF-4 with nozzles in the charge pipe. I bought the fuel-it meth system & the only thing I changed was I teed into the 6mm supply line before the fav to supply the fuel-it system. After the fav i still have a small single nozzle to the charge pipe.
Problem is the system turns on normally, But under boost I have no flow bars? So I dont know if it is activating or not. Any ideas?