N55 3.5 Bar issue *PLEASE HELP*

SilveraA

New Member
May 22, 2020
3
I am trying to tune my own car and from what I gathered its working great but I've just upgraded turbo and also bought 3.5 bar sensor. My issue is that I want to run 24-25 psi but even if I set load to 220 I can't run above 22.6. I assume I need to not click the 3.5 checkmark on MHD but how do I make the sensor read up to 36 psi ?

I don't want to use JB4 but I think that is the only option I have left
 

doublespaces

Administrator
Oct 18, 2016
8,651
AZ
I'm not sure on the N55, but the 3.5 check box I thought was for JB4 only or something. The scaling needs to be done on your end in the tune. This is really really rusty info though, hopefully that points you in the right direct.

Someone else feel free to chime in if that is not correct.

@Twisted Tuning
 

SilveraA

New Member
May 22, 2020
3
Yeah I figured on the scaling part but I found nothing online. It’s really cat and mouse thing. I thought this was my best bet to find any kind of information

I'm not sure on the N55, but the 3.5 check box I thought was for JB4 only or something. The scaling needs to be done on your end in the tune. This is really really rusty info though, hopefully that points you in the right direct.

Someone else feel free to chime in if that is not correct.

@Twisted Tuning
 
Thread starter Similar threads Forum Replies Date
Boldy169 N55 3
Boldy169 N55 0
00svt N55 23
A N55 8
P N55 0

Similar threads


Top