Direct Port Nitrous Setup - N54

Discussion in 'N54' started by Twisted Tuning, Nov 3, 2016.

Trader History (0)
  1. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    Just bringing this over here as well. Finalized design and will be installing and testing the prototype in the next couple weeks.





    UPDATE: 3 November 2016

    Drawing sent to my CNC. The current drawing has be changed from the original to have mounting on the underside. Also tapers port holes to accommodate both nitrous Jets and Meth nozzles.

    I actually had air channels milled into the design in front of the ports where the jets would be to smooth the transition or airflow around the Nitrous jet. But removed them for the final rendition as them being there would effect the Meth nozzle spray dispersion being that they are shorter/lower profile than the nitrous jets.

    Should have the actual prototype in in the coming weeks to start real world testing.

    http://www.bummerboost.com/attachment.php?attachmentid=51516&d=1478197159
    http://www.bummerboost.com/attachment.php?attachmentid=51517&d=1478197159
    http://www.bummerboost.com/attachment.php?attachmentid=51518&d=1478197160
    http://www.bummerboost.com/attachment.php?attachmentid=51519&d=1478197164

    Below you can see the air channels i was talking about which i removed for the final version.

    http://www.bummerboost.com/attachment.php?attachmentid=51520&d=1478197165
    http://www.bummerboost.com/attachment.php?attachmentid=51521&d=1478197171


    Been a minute, but the light is seen at the end of the tunnel, lol.
     
  2. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    What kind of control will you be using?
     
  3. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    I'll be using a Max4 for the nitrous control. Or full name is maximiser 4.
     
  4. This is very impressive. I look forward to seeing this in action!
     
  5. Abacus38

    Abacus38 Corporal

    190
    Tampa/Orlando, FL
    2007 Ti Ag 335i
    Awesome!!!!!! Are you just spraying for topend power?
     
  6. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    Thank you. Shouldn't be long now. Apparently there is a demand for something like this. So I'm trying to do it all at a good rate of speed.


    Yes...

    I have no intentions on upgrading turbos on this car. I love the midrange of the stockers. So what I'm looking to do is moderately help increase midrange then increase injection amount progressively up top as turbo power falls off for a nice long linear curve.

    In the end for this car. 450whp is the goal in just boost. And 600whp on the bottle with great top end for a stock turbo N54.
     
  7. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    Nothing wrong with a little nitrous. I've never heard of the Max 4, although I'm out of touch with nitrous management.
     
  8. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    Yes it's great. here...check out the features and failsafes.....

    Maximizer 4 Progressive Nitrous Controller
     
    • Informative Informative x 1
    • List
  9. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    Time boost mph rpm and throttle percentage. Pretty much covers it all. Which method do you intend to use?
     
  10. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    More than likely RPM and AFR correction.
     
  11. Abacus38

    Abacus38 Corporal

    190
    Tampa/Orlando, FL
    2007 Ti Ag 335i
    Are you going used NLS with the spray?
     
  12. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    as of right now, NLS isn't available flash only. iknow that is being worked on by Jake. but its not available yet. I have NLS on my other shop car. don't really use it as much as i would have expected, lol.
     
  13. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    Any update?
     
  14. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    yes, CNC shop had an issue with one of their machines. Part is delayed. Will update when i have the new part in hand. Thanks for your interest.
     
  15. Love this thread. Keep up with the updates
     
  16. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    Thanks for the interest, and absolutely
     
  17. Twisted Tuning

    Twisted Tuning Sergeant Vendor

    397
    Final Revision of the Twisted Tuning N54 Direct Port Nitrous plate (Also will be available for Direct Port Methanol Injection). May also port over to the N55 after some testing.

    Now to put it on the Jig, setup all the hardlines in the spare intake manifold. And get this thing on the car and start juicing. There have been a lot of interested parties in this plate. So you will soon be able to purchase this plate exclusively from us....

    #TwistedTuning #N54 #N55 #NitrousExpress #Nitrous #DirectPort #MethanolInjection #GoBigOrGoHome #CNC #CAD #CAM #Spoolstreet

    PhotoGrid_1480718094810.png IMAG3643.jpg IMAG3639.jpg IMAG3642.jpg IMAG3640.jpg IMAG3633.jpg
     
    • Like Like x 1
    • Winner Winner x 1
    • List
  18. veer90

    veer90 Private

    34
    Rye, NY
    AW e90 335i 6MT
    looks nice! any idea on what the price range will be?
     
  19. ATL-IS-N54

    ATL-IS-N54 Corporal

    Should make a kit for those poor
    Poor poor N52 owners ... They are dying for mods on that platform... But I digress... No need to throw this off topic... Altho I'm very curious about the results on this single turbo N52 test motor they are building... See there I go off topic again... Twisted tuning ftw
     
  20. doublespaces

    doublespaces Administrator

    AZ
    2009 E93 335i
    Looks awesome Justin!
     

Share This Page