DME has two connectors with two subconnectors for each connector. So there are 4 subconnectors. The FF will use two of these subconnectors. Refer to my post attachment above.
The FF blue tmap wire connects directly into the AIC green wire.
They stay off the boards for the most part because they're time and energy pits with little return compared to the time put in.I see on the card has the color and shape of the subconnectors. Will do. Thanks.
Any idea why Motiv does not reply to emails?
They stay off the boards for the most part because they're time and energy pits with little return compared to the time put in.
Considering you said nothing about email correspondence in your message I was responding to...An
An email to them has nothing to do with checking car forums.
An
An email to them has nothing to do with checking car forums.
Do not install until the MHD module is released. Jake H or Chris @ Motiv should have the install PDF out prior.
Please post or send a PM link of the forum article you are referring to as I have not found any. Please be aware that forums have nothing to do with sending instructions to customers. It would be insane to expect customers to rely on other customer in forums to install a product you sell.
Thank you for the advice though.
I was not referring to a specific article. I was simply saying that they can and should return emails. Convert was suggesting they are too busy to check car forums but you were talking about email.
Looks like you quoted the wrong person.STFU stop whining.
It's annoying getting notifications and emails with your whine all the time.
How old are you, @matreyia ?
Looks like you quoted the wrong person.
We have everything installed, with the DME connection wires coiled up and wire tied, patiently waiting.
Did you pick out a switched power source connection yet?
Orange wire in the green connector. Same as JB4 power source. Using it for AIC1, LPFP and FF box. The LPFP has its own 18ga wire with 10a fuse as that will pull the most power.
Thanks. Sounds familiar now. Same place I wired in the procede way back when.
It's wired to Atmosphere right nowDid you pick out a switched power source connection yet?
I think the frustration was that the big announcement of "it'll be released by end of March" to meet the Spoolstreet giveaway only applied to the "hardware" and the most important part that is still not available, with no communication, no eta, no nothing, AND that part wasn't made completely clear at launch. I understand that Motiv and MHD and Jake are 3 different entities and I'm sure they have had unforeseen issues. There was clearly a delay of the flex fuel software - hence, they should have not released the hardware. Who cares about meeting a "commitment" to a giveaway, that's just an excuse - give a raincheck and don't release it for sale if the whole thing isn't ready. If there was a delay discovered before taking, waiting, and then shipping orders for the hardware, which wasn't something that happened quickly, why not at least give some communication to the community. MHD hasn't said a single thing, Motiv hasn't said anything and all Jake has said was that the Motiv portion was promised by end of March and that the software is "coming."
Jake is part of Motiv, FWIW. So it's two peeps - him and Martial, sorting this out I surmise. Yeah it would be nice to have some clarity at this point, and it did seems like end of March the capability was going to be released. Hopefully this will come to fruition soon... and yeah ... this is how it can be at the bleeding edge.
Filippo